| Platform: LG MTK
Selected port: COM1
Selected baudrate: 230400
Selected model: K500MM
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.Canceled!
Performed by 3.0.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 230400
Selected model: K500MM
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.Canceled!
Performed by 3.0.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 230400
Selected model: K500MM
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM407
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10i-310-160-JUL-16-2020-ARB00+0
LAF Version: 1.1
Product ID: VP01SStarlyn123
IMEI: 35454OctopusDone
Target operator: LAO
Hardware: rev_10
Battery level: 54%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 35454OctopusDone
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K500MM_35454OctopusDone_23-09-2020_10-10-56.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: Starlyn1232
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 300 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Writing security area...
Initializing flash...OK
Writing security area...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.4 Software version.
LG K51 MetroPCS App Device Unlock Done, Download Mode, no Root needed, Octopus continue being Octopus. |