GSM-Forum - View Single Post - Meizu m8c after factory reset dead [Solved]

siudziu · 09-28-2020, 11:48

Welcome to Octoplus FRP Tool v.1.9.5.1
Card S/N: 100005C71
Initializing...
Connecting to server...
Serial: 0100005C71
Downloading "20180419203756_intl_prd_fvcs_lock_stable_6.3.5.0G .rar"...
File "20180419203756_intl_prd_fvcs_lock_stable_6.3.5.0G .rar" successfull downloaded
Platform: MEIZU
Selected model: M8C (M810H)
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100ED0002
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Meizu
Model: Meizu M8c
Device: MeizuM8c
Platform: msm8937
Android version: 7.1.2
Display ID: Flyme 6.3.5.1G
Firmware version: MZU_Z216X_U000E_V1.0B22_SMT_20180427
Resetting FRP lock..
Searching for signatures...
FRP signature not found!
Operation was failed!
Performed by 1.9.5.1 Software version.

Platform: MEIZU
Selected model: M8C (M810H)
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100ED0002
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Meizu
Model: Meizu M8c
Device: MeizuM8c
Platform: msm8937
Android version: 7.1.2
Display ID: Flyme 6.3.5.1G
Firmware version: MZU_Z216X_U000E_V1.0B22_SMT_20180427
Factory Reset...
Formatting User Data section
Rebooting phone
Backup saved as Meizu_Meizu M8c_28-09-2020_12-25-35.dump file
Factory Reset is successfully performed!
Performed by 1.9.5.1 Software version.

after phone is boot loop

then i write firmware from support

Platform: MEIZU
Selected model: M8C (M810H)
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100ED0002
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Meizu
Model: Meizu M8c
Device: MeizuM8c
Platform: msm8937
Android version: 7.1.2
Display ID: Flyme 6.3.5.1G
Firmware version: MZU_Z216X_U000E_V1.0B22_SMT_20180427
Writing firmware...
Selected firmware files:
D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_l ock_stable_6.3.5.0G\QFIL\rawprogram_unsparse.xml
D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_l ock_stable_6.3.5.0G\QFIL\patch0.xml
Opening "D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_ lock_stable_6.3.5.0G\QFIL\rawprogram_unsparse.xml" ...
Writing modem...
Writing sbl1...
Writing sbl1bak...
Writing rpm...
Writing rpmbak...
Writing tz...
Writing tzbak...
Writing devcfg...
Writing devcfgbak...
Writing dsp...
Writing fsg...
Writing sec...
Writing splash...
Writing aboot...
Writing abootbak...
Writing custom...
Writing custom...
Writing custom...
Writing custom...
Writing custom...
Writing custom...
Writing boot...
Writing devinfomz...
Writing recovery...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing system...
Writing cache...
Writing cache...
Writing cache...
Writing persist...
Writing mdtp...
Writing cmnlib...
Writing cmnlibbak...
Writing cmnlib64...
Writing cmnlib64bak...
Writing keymaster...
Writing keymasterbak...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing userdata...
Writing PrimaryGPT...
Writing BackupGPT...
Opening "D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_ lock_stable_6.3.5.0G\QFIL\patch0.xml"...
Writing Patch...
Firmware Write successfully.
Performed by 1.9.5.1 Software version.

now phone is not power on only qualcomm hs-usb diagnostic 900E device

09-28-2020, 11:48	#1 (permalink)
siudziu Freak Poster Join Date: Dec 2004 Location: POLAND Age: 43 Posts: 440 Member: 99605 Status: Offline Thanks Meter: 70	Meizu m8c after factory reset dead [Solved] Welcome to Octoplus FRP Tool v.1.9.5.1 Card S/N: 100005C71 Initializing... Connecting to server... Serial: 0100005C71 Downloading "20180419203756_intl_prd_fvcs_lock_stable_6.3.5.0G .rar"... File "20180419203756_intl_prd_fvcs_lock_stable_6.3.5.0G .rar" successfull downloaded Platform: MEIZU Selected model: M8C (M810H) Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM10 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100ED0002 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Meizu Model: Meizu M8c Device: MeizuM8c Platform: msm8937 Android version: 7.1.2 Display ID: Flyme 6.3.5.1G Firmware version: MZU_Z216X_U000E_V1.0B22_SMT_20180427 Resetting FRP lock.. Searching for signatures... FRP signature not found! Operation was failed! Performed by 1.9.5.1 Software version. Platform: MEIZU Selected model: M8C (M810H) Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM10 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100ED0002 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Meizu Model: Meizu M8c Device: MeizuM8c Platform: msm8937 Android version: 7.1.2 Display ID: Flyme 6.3.5.1G Firmware version: MZU_Z216X_U000E_V1.0B22_SMT_20180427 Factory Reset... Formatting User Data section Rebooting phone Backup saved as Meizu_Meizu M8c_28-09-2020_12-25-35.dump file Factory Reset is successfully performed! Performed by 1.9.5.1 Software version. after phone is boot loop then i write firmware from support Platform: MEIZU Selected model: M8C (M810H) Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM10 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100ED0002 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Meizu Model: Meizu M8c Device: MeizuM8c Platform: msm8937 Android version: 7.1.2 Display ID: Flyme 6.3.5.1G Firmware version: MZU_Z216X_U000E_V1.0B22_SMT_20180427 Writing firmware... Selected firmware files: D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_l ock_stable_6.3.5.0G\QFIL\rawprogram_unsparse.xml D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_l ock_stable_6.3.5.0G\QFIL\patch0.xml Opening "D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_ lock_stable_6.3.5.0G\QFIL\rawprogram_unsparse.xml" ... Writing modem... Writing sbl1... Writing sbl1bak... Writing rpm... Writing rpmbak... Writing tz... Writing tzbak... Writing devcfg... Writing devcfgbak... Writing dsp... Writing fsg... Writing sec... Writing splash... Writing aboot... Writing abootbak... Writing custom... Writing custom... Writing custom... Writing custom... Writing custom... Writing custom... Writing boot... Writing devinfomz... Writing recovery... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing system... Writing cache... Writing cache... Writing cache... Writing persist... Writing mdtp... Writing cmnlib... Writing cmnlibbak... Writing cmnlib64... Writing cmnlib64bak... Writing keymaster... Writing keymasterbak... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing userdata... Writing PrimaryGPT... Writing BackupGPT... Opening "D:\GSM\Flashe\meizu\20180419203756_intl_prd_fvcs_ lock_stable_6.3.5.0G\QFIL\patch0.xml"... Writing Patch... Firmware Write successfully. Performed by 1.9.5.1 Software version. now phone is not power on only qualcomm hs-usb diagnostic 900E device