i worked with changing the imei number of a Lenovo phone.
software shows both imei changed but in mobile phone only imei 2 is always changed and imei remains the old...
plz look at the log here
Code:
Operation : Identify [ v2.09 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : PPR1.180610.011
Display ID : L19111_CN_OPEN_USER_SC9863_P_DRV_11.0.182_ST_200430
Ver. Incmt : 11.0.182_200430
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-05-05
Build Time : 30.04.2020
Product Model : Lenovo L19111
Product Brand : Lenovo
Product Name : AK47
Product Device : AK47
Product Manfct : LENOVO
Product Info : AK47
Product Board : SC9863A
Board Platform : sp9863a
Platform Version: MOCORTM_18B_W19.10.2_P38.01_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_P38.01
HW Version: sc9863A_modem
CMP_Time : 04-08-2020 16:01:06
MODEM TAG : MOCORTM_18B_W19.10.2_P38.01_Debug_FM_BASE_18B_W19.10.2_P38.01_sc9863A_modem_sharkl3_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:02:44
Card found : 10AAF75B , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09
Load IDBase v8331 Ok!
Card found : 10AAF75B , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09
Load IDBase v8331 Ok!
Operation : Repair Security [ v2.09 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 866355040297211
IMEI[2] : 866355040297229
IMEI[3] : 867400020316638
SEC : SLS:2, SKS:0, SKV:E
New SecInfo :
IMEI[1] : 358848100235985
IMEI[2] : 358848100745983
NVMng : Item updated!
NVMng : Post-Process Ok!
Done!
Elapsed: 00:01:11
Card found : 10AAF75B , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09
Load IDBase v8331 Ok!
Operation : Identify [ v2.09 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : PPR1.180610.011
Display ID : L19111_CN_OPEN_USER_SC9863_P_DRV_11.0.182_ST_200430
Ver. Incmt : 11.0.182_200430
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-05-05
Build Time : 30.04.2020
Product Model : Lenovo L19111
Product Brand : Lenovo
Product Name : AK47
Product Device : AK47
Product Manfct : LENOVO
Product Info : AK47
Product Board : SC9863A
Board Platform : sp9863a
Platform Version: MOCORTM_18B_W19.10.2_P38.01_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_P38.01
HW Version: sc9863A_modem
CMP_Time : 04-08-2020 16:01:06
MODEM TAG : MOCORTM_18B_W19.10.2_P38.01_Debug_FM_BASE_18B_W19.10.2_P38.01_sc9863A_modem_sharkl3_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:02:37
Operation : Repair Security [ v2.09 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 866355040297211
IMEI[2] : 358848100745983
IMEI[3] : 867400020316638
SEC : SLS:2, SKS:0, SKV:E
New SecInfo :
IMEI[1] : 358848100235985
IMEI[2] : 358848100745983
NVMng : Item updated!
NVMng : Post-Process Ok!
Done!
Elapsed: 00:01:25
Operation : Repair Security [ v2.09 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Repair Security [ v2.09 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 866355040297211
IMEI[2] : 358848100745983
IMEI[3] : 867400020316638
SEC : SLS:2, SKS:0, SKV:E
New SecInfo :
IMEI[1] : 358848100235985
NVMng : Item updated!
NVMng : Post-Process Ok!
Done!
Elapsed: 00:01:25
Operation : Read FW [ v2.09 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Read FW [ v2.09 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Read FW [ v2.09 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 2000000
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : PPR1.180610.011
Display ID : L19111_CN_OPEN_USER_SC9863_P_DRV_11.0.182_ST_200430
Ver. Incmt : 11.0.182_200430
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-05-05
Build Time : 30.04.2020
Product Model : Lenovo L19111
Product Brand : Lenovo
Product Name : AK47
Product Device : AK47
Product Manfct : LENOVO
Product Info : AK47
Product Board : SC9863A
Board Platform : sp9863a
AndroidVer : 9
VlnrLevel : 0x02
SP9863A__LENOVO__Lenovo_L19111__9__L19111_CN_OPEN_USER_SC9863_P_DRV_11.0.182_ST_200430__PPR1.180610.011__AK47
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : dtb.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
I can upload flash file if needed.....