[Manikanika81]

Originally Posted by ..::GMSR::..

Please refund my credit, Process faled: wrong input data

Card found : 4FE17366 , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09

Load IDBase v8331 Ok!



1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Hisense : HLTE100E_14
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41412
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-09-05
Build Time : 15.10.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_02_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S06


Platform Version: MOCORTM_18A_W20.18.1_P1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.18.1_P1
HW Version: sc9832e_modem
CMP_Time : 05-22-2020 14:39:46

MODEM TAG : MOCORTM_18A_W20.18.1_P1_Debug_FM_BASE_18A_W20.18.1 _P1_sc9832e_modem_sharkle_Smart_Phone

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:42

Operation : Read FW [ v2.09 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Hisense : HLTE100E_14
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41412
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-09-05
Build Time : 15.10.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_02_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S06

AndroidVer : 10
VlnrLevel : 0x02

SP9832E__10__Hisense_HLTE100E_14_S03_02_01_ZA04__Q P1A.190711.020__sp9832e_1h10_go

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : deltanv_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 17%
Read : socko.img
ExtSparse : Compression ratio : 34%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Read : udc_config.bin
Read : phase.cfg
Read : super.img
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Cookies!
In search of truth ...
Looking around

Firmware size : 0x8482681C ( 2.07 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:17:17

Operation : SP Unlock [ v2.09 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 38433 release-keys
Platform Version: MOCORTM_18A_W20.18.1_P1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.18.1_P1
HW Version: sc9832e_modem
CMP_Time : 05-22-2020 14:39:46

MODEM TAG : MOCORTM_18A_W20.18.1_P1_Debug_FM_BASE_18A_W20.18.1 _P1_sc9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 862359042418282
IMEI[2] : 862359042418290
WIFIMAC : 7CB37B3D8FD4
BT_MAC : 7CB37B3D4025
SEC : SLS:1, SKS:0, SKV:3


SLStatus : 32
Status : Locked! Server unlock required!
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 10, price:5
Process...
Process faled: wrong input data



Reconnect Power/Cable!

Process faled: wrong input data = 0 Credit