GSM-Forum - View Single Post - ANE-LX1 com state [Answered]

alnazef · 12-26-2020, 15:04

Found COM ports:
1: COM45 HUAWEI USB COM 1.0
2: COM1 Communications Port
3: COM13 USB Serial Port

Job ID: 0000000000521D62
2020-12-26 13:58:41 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ANE-LX1
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Performing OFF Factory Mode operation...
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Warning: Reading product model failed
Warning: oem get-build-number failed

ON/OFF Factory Mode failed.
Performed by ‪1.2.3‬ Software version.

12-26-2020, 15:04	#1 (permalink)
alnazef Insane Poster Join Date: Apr 2014 Location: yem Posts: 62 Member: 2172436 Status: Offline Sonork: lololo Thanks Meter: 2	ANE-LX1 com state [Answered] Found COM ports: 1: COM45 HUAWEI USB COM 1.0 2: COM1 Communications Port 3: COM13 USB Serial Port Job ID: 0000000000521D62 2020-12-26 13:58:41 GMT ------------------------------------------------- Starting ON/OFF Factory Mode Selected phone model: ANE-LX1 To Enable Factory mode put the phone in Upgrade mode and connect USB cable! To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode! Performing OFF Factory Mode operation... Searching HUAWEI USB COM 1.0 port... Writing bootloader KIRIN659_A8.0_V1... Initializing remote service connection... Writing ‪XLOADER‬ partition... Writing ‪FASTBOOT‬ partition... Bootloader Update successfully Rebooting to fastboot mode... Searching Fastboot devices... Found a fastboot device: 0123456789ABCDEF Warning: Reading product model failed Warning: oem get-build-number failed ON/OFF Factory Mode failed. Performed by ‪1.2.3‬ Software version.