Download the same firmware version and flash only System, but it keeps getting the same error
Code:
Operation : Disable Screen Locks
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM14)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_035]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 8A [olivelite]
Brand : Xiaomi
Prod.Name : olivelite_eea
Software : ZQL2116-olivelite-build-20191214170409, V11.0.2.0.PCPEUXM [Sat Dec 14 17:06:03 CST 2019]
Android Ver. : 9
Patch Level : 2019-12-01
USERDATA : Normal
For Normal userdata, you can use [Reset Locks] button.
Disabling Screen Locks...Failed
If system partition is manipulated, flash only system and try again.
Operation Failed.
QcFire Ver. 6.4