Alcatel TCL 5001A (( SC9863A ))
Operation : Read FW [ v2.10 ]
Extra : Ignore CriticalPart Verify : Enabled
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : PPR1.180610.011
Display ID : 5001A_AEUY_1SIM_V1.7_20200611_UNLOCK_P
Ver. Incmt : 5001A_AEUY_1SIM_V1.7
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-06-05
Build Time : 11.06.2020
Product Model : 5001A
Product Brand : TCL
Product Name : 5001A
Product Device : Wright
Product Manfct : TCL
Product Info : Wright
Product Board : sp9863a_1h10
Board Platform : sp9863a
AndroidVer : 9
VlnrLevel : 0x02
SP9863A__TCL__5001A__9__5001A_AEUY_1SIM_V1.7_20200 611_UNLOCK_P__PPR1.180610.011__Wright
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : dtb.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
Read : vendor.img
Read : otp_product.img
ExtSparse : Compression ratio : 1%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 16%
Read : udc_config.bin
Read : deltanv_l.bin
Read : phase.cfg
Read : u-boot-spl.bin
Firmware size : 0xFAC42288 ( 3,92 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:23:49