| after reboot PC and A15 now
Brand : Oppo
Model : A15 (CPH2185)
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1632 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM322)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.9]
THANK YOU gkmobiles & UMT |