HuAWEI P8 LITE ANE-LX1 UNLOCK DONE WITH MANUFACTURE MODE FREE
Quote:
Welcome to Octoplus Huawei Software v.1.2.4.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM18 Android Adapter PCUI
2: COM19 HUAWEI Mobile Connect - Fake Acm Interface
3: COM20 DBAdapter Reserved Interface
4: COM28 HUAWEI Mobile Connect - Fake Acm Interface
2021-04-20 12:44:39 GMT -------------------------------------------------
Starting Connect
Selected phone model: ANE-LX1
Detected Android Adapter PCUI port
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...
Device Model: PRA-L11
Firmware: System 8.0.0.046(0EY2)
Boot: System 8.0.0.046(0EY2)_BOOT
Fastboot: Chipset-dallas8.0.1.001(01BD)_FASTBOOT
System: System 8.0.0.046(0EY2)
Recovery: (unknow)
MEID: 00000000000000
PESN: 00000000
IMEI A: 865006030720164
IMEI B: 000000000000000
Bluetooth MAC: D8:C7:71:33:3E:8A
WiFi MAC: D8:C7:71:33:3D:8B
S/N: 57U7N17627006744
Board S/N: 7N4EWG176W104981
Vendor Code: hw
Country Code: eu
Connect done.
Performed by 1.2.4.3 Software version.
2021-04-20 12:44:51 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: ANE-LX1
Reading basic data...
Reading secure data...
Writing public keys...
Identifying security...
Writing sim lock data...
Rebooting device...
Please, make sure to reboot your device manually if it doesn't reboot
Direct Unlock done.
Performed by 1.2.4.3 Software version.
|