GSM-Forum - View Single Post - Post here successfully job with Pandora's

kzafquiel · 04-22-2021, 06:23

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

copiar imagen de pagina web
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35
Get sec config... OK [00000007]
Active sec flags: [ SBC SLA DAA]
Get BROM version... OK
AUTH file not found!

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... timeout(S_BROM_CMD_STARTCMD_TIMEOUT)

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35
Get sec config... OK [00000007]
Active sec flags: [ SBC SLA DAA]
Get BROM version... OK
AUTH file not found!

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... error(4)

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... error(4)

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35
Get sec config... OK [00000000]
Get BROM version... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Check bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x150100514531334D420D5902B282A0D3
Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9]
Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35]
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_ID : 0x150100514531334D420D5902B28224D3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Read Flash Info done!

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read Flash Info
Software version: 1.7

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35
Get sec config... OK [00000000]
Get BROM version... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Check bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x150100514531334D420D5902B282A0D3
Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9]
Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35]
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_ID : 0x150100514531334D420D5902B28224D3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Read Flash Info done!

Selected model: Alcatel 5080A (Shine Lite)
Operation: Read PTT
Software version: 1.7

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35
Get sec config... OK [00000000]
Get BROM version... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Check bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x150100514531334D420D5902B282A0D3
Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9]
Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35]
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_ID : 0x150100514531334D420D5902B28224D3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Wait for device... OK
High Speed USB detected at COM10
Open port... OK
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read partition preloader... OK
Read partition pgpt... OK
Read partition proinfo... OK
Read partition nvram... OK
Read partition protect1... OK
Read partition protect2... OK
Read partition tctpersist... OK
Read partition simlock... OK
Read partition para... OK
Read partition lk... OK
Read partition boot... OK
Read partition recovery... OK
Read partition logo... OK
Read partition expdb... OK
Read partition seccfg... OK
Read partition oemkeystore... OK
Read partition secro... OK
Read partition keystore... OK
Read partition tee1... OK
Read partition tee2... OK
Read partition persist... OK
Read partition efuse... OK
Read partition frp... OK
Read partition nvdata... OK
Read partition metadata... OK
Read partition system... OK
Read partition cache... OK
Read partition otp... OK
Read partition flashinfo... OK
Read partition sgpt... OK
Dumping Partitions done!

Selected model: Alcatel 5080A (Shine Lite)
Operation: Repair
Software version: 1.7

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35
Get sec config... OK [00000000]
Get BROM version... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Check bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x150100514531334D420D5902B282A0D3
Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9]
Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35]
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_ID : 0x150100514531334D420D5902B28224D3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Wait for device... OK
High Speed USB detected at COM10
Open port... OK
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Get OTP size... OK [0x00800000]
Read OTP... OK
IMEI: xxxxxxxx1523764
Set new IMEI to:
IMEI: xxxxxxxx7504164
Check OTP status... [S_DA_OTP_LOCKED]
Write OTP... OK
Repair Security done!

04-22-2021, 06:23	#11 (permalink)
kzafquiel Freak Poster Join Date: Jun 2010 Location: MEXICO Posts: 343 Member: 1318721 Status: Offline Thanks Meter: 166	Alcatel 5080A (Shine Lite) read flash , imei done Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 copiar imagen de pagina web Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Library Version [1] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Load DownloadAgent... OK ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35 Get sec config... OK [00000007] Active sec flags: [ SBC SLA DAA] Get BROM version... OK AUTH file not found! Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... timeout(S_BROM_CMD_STARTCMD_TIMEOUT) Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Library Version [1] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Load DownloadAgent... OK ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35 Get sec config... OK [00000007] Active sec flags: [ SBC SLA DAA] Get BROM version... OK AUTH file not found! Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... error(4) Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 Host Power Off... OK Switch virtual port to NONE... OK Connect Type-C to HUB... OK Host Power On... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... error(4) Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Wait for device... OK Read usbhost speed... FULL Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Get sec config... OK [00000007] Active sec flags: [SBC SLA DAA] Advanced Bypass Security... OK Disconnect virtual port... OK Connect Type-C to HUB... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Library Version [1] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Load DownloadAgent... OK ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35 Get sec config... OK [00000000] Get BROM version... OK Search DA... OK [11] Send preloader... OK Start preloader... OK Check preloader answer... OK Send bootloader... OK Start bootloader... OK Check bootloader answer... OK Wait for answer from bootloader... OK Wait for hw detection... OK Wait DA version... v4.2 Send BROM version... OK Send storage config... OK SyncBmtInfoWithDA... OK Set params... OK Read flash info... OK EMMC_ID: 0x150100514531334D420D5902B282A0D3 Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9] Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35] Init DRAM... OK Enable DRAM... OK Sync with DA... OK Wait for DA H/W detection... OK EMMC INFO: EMMC_ID : 0x150100514531334D420D5902B28224D3 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0000400000 (4.00Mb) EMMC_USER : 0x03A3E00000 (14.56Gb) RAM INFO: INT_SRAM: 0x0000020000 (128.00Kb) EXT_RAM : 0x0080000000 (2.00Gb) Read Flash Info done! Selected model: Alcatel 5080A (Shine Lite) Operation: Read Flash Info Software version: 1.7 Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Wait for device... OK Read usbhost speed... FULL Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Get sec config... OK [00000007] Active sec flags: [SBC SLA DAA] Advanced Bypass Security... OK Disconnect virtual port... OK Connect Type-C to HUB... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Library Version [1] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Load DownloadAgent... OK ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35 Get sec config... OK [00000000] Get BROM version... OK Search DA... OK [11] Send preloader... OK Start preloader... OK Check preloader answer... OK Send bootloader... OK Start bootloader... OK Check bootloader answer... OK Wait for answer from bootloader... OK Wait for hw detection... OK Wait DA version... v4.2 Send BROM version... OK Send storage config... OK SyncBmtInfoWithDA... OK Set params... OK Read flash info... OK EMMC_ID: 0x150100514531334D420D5902B282A0D3 Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9] Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35] Init DRAM... OK Enable DRAM... OK Sync with DA... OK Wait for DA H/W detection... OK EMMC INFO: EMMC_ID : 0x150100514531334D420D5902B28224D3 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0000400000 (4.00Mb) EMMC_USER : 0x03A3E00000 (14.56Gb) RAM INFO: INT_SRAM: 0x0000020000 (128.00Kb) EXT_RAM : 0x0080000000 (2.00Gb) Read Flash Info done! Selected model: Alcatel 5080A (Shine Lite) Operation: Read PTT Software version: 1.7 Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Wait for device... OK Read usbhost speed... FULL Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Get sec config... OK [00000007] Active sec flags: [SBC SLA DAA] Advanced Bypass Security... OK Disconnect virtual port... OK Connect Type-C to HUB... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Library Version [1] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Load DownloadAgent... OK ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35 Get sec config... OK [00000000] Get BROM version... OK Search DA... OK [11] Send preloader... OK Start preloader... OK Check preloader answer... OK Send bootloader... OK Start bootloader... OK Check bootloader answer... OK Wait for answer from bootloader... OK Wait for hw detection... OK Wait DA version... v4.2 Send BROM version... OK Send storage config... OK SyncBmtInfoWithDA... OK Set params... OK Read flash info... OK EMMC_ID: 0x150100514531334D420D5902B282A0D3 Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9] Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35] Init DRAM... OK Enable DRAM... OK Sync with DA... OK Wait for DA H/W detection... OK EMMC INFO: EMMC_ID : 0x150100514531334D420D5902B28224D3 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0000400000 (4.00Mb) EMMC_USER : 0x03A3E00000 (14.56Gb) RAM INFO: INT_SRAM: 0x0000020000 (128.00Kb) EXT_RAM : 0x0080000000 (2.00Gb) Check USB status... USB_FULL_SPEED Switching to USB high speed... OK Wait for device... OK High Speed USB detected at COM10 Open port... OK Check USB status... USB_HIGH_SPEED Read partitions info from phone... OK Read partition preloader... OK Read partition pgpt... OK Read partition proinfo... OK Read partition nvram... OK Read partition protect1... OK Read partition protect2... OK Read partition tctpersist... OK Read partition simlock... OK Read partition para... OK Read partition lk... OK Read partition boot... OK Read partition recovery... OK Read partition logo... OK Read partition expdb... OK Read partition seccfg... OK Read partition oemkeystore... OK Read partition secro... OK Read partition keystore... OK Read partition tee1... OK Read partition tee2... OK Read partition persist... OK Read partition efuse... OK Read partition frp... OK Read partition nvdata... OK Read partition metadata... OK Read partition system... OK Read partition cache... OK Read partition otp... OK Read partition flashinfo... OK Read partition sgpt... OK Dumping Partitions done! Selected model: Alcatel 5080A (Shine Lite) Operation: Repair Software version: 1.7 Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Wait for device... OK Read usbhost speed... FULL Read Device Descriptor... Get VID/PID...0E8D/0003 Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Get sec config... OK [00000007] Active sec flags: [SBC SLA DAA] Advanced Bypass Security... OK Disconnect virtual port... OK Connect Type-C to HUB... OK Wait for device connecting... OK Device found at COM8 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0335 Get HW & SW version from device... OK HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6735] Library Version [1] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Load DownloadAgent... OK ME_ID = 0xC209C2CD, 0xCD596B42, 0xC71B0813, 0x9E786C35 Get sec config... OK [00000000] Get BROM version... OK Search DA... OK [11] Send preloader... OK Start preloader... OK Check preloader answer... OK Send bootloader... OK Start bootloader... OK Check bootloader answer... OK Wait for answer from bootloader... OK Wait for hw detection... OK Wait DA version... v4.2 Send BROM version... OK Send storage config... OK SyncBmtInfoWithDA... OK Set params... OK Read flash info... OK EMMC_ID: 0x150100514531334D420D5902B282A0D3 Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [9] Trying EMI [FCD13E57, 49CE1F40, 49120D13, 5DCFFA1A, DCF716DA, BBFE481A, ADB0E084, C3F7DB20, CC85EC35] Init DRAM... OK Enable DRAM... OK Sync with DA... OK Wait for DA H/W detection... OK EMMC INFO: EMMC_ID : 0x150100514531334D420D5902B28224D3 EMMC_BOOT1: 0x0000400000 (4.00Mb) EMMC_BOOT2: 0x0000400000 (4.00Mb) EMMC_RPMB : 0x0000400000 (4.00Mb) EMMC_USER : 0x03A3E00000 (14.56Gb) RAM INFO: INT_SRAM: 0x0000020000 (128.00Kb) EXT_RAM : 0x0080000000 (2.00Gb) Check USB status... USB_FULL_SPEED Switching to USB high speed... OK Wait for device... OK High Speed USB detected at COM10 Open port... OK Check USB status... USB_HIGH_SPEED Read partitions info from phone... OK Get OTP size... OK [0x00800000] Read OTP... OK IMEI: xxxxxxxx1523764 Set new IMEI to: IMEI: xxxxxxxx7504164 Check OTP status... [S_DA_OTP_LOCKED] Write OTP... OK Repair Security done!