| same thing
Welcome to Octoplus/Octopus Box LG Software version 3.1.1.03
Card S/N : 0001008C65
Connecting to server ...OK
Authorizing...OK
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000EB0CCB
Checking data...OK
Platform: LG MTK
Selected port: COM44
Selected baudrate: 460800
Selected model: Q730TM
Connecting to phone...
Phone found at port COM45
Mode: Emergency
Initializing flash...OK
Model ID: LM-Q730TM
Platform: mt6765
Code name: mdh50lm
Android version: 10
SW version: LMQ730TM9AT-00-V10r-310-240-FEB-18-2021-
ARB00+0
LAF Version: 1.1
Product ID: VH03S210206001167
IMEI: 354590-11-777773-2
Target operator: LAO
Hardware: rev_11
Battery level: 0%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354590-11-777773-2
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Checking operation...
Trying second method...
Checking Resource File...
Step 1...
Step 2...
Please, disconnect cable, then press "Ok" button
Connecting to server 0...OK
Octopus smart card is present.
Checking smart card...OK
Username: rakka03
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 1000 credits.
To perform "Repair IMEI" operation you need to have 100 credits.
Please, connect powered OFF phone with USB cable.
Found port COM45
Detecting Chip Version...
Platform: MT6765: 0766.0000
HW version: 8A00.CA00.0000.0000
Connecting...
Target config: 0005
Brom Version: FF
BootLoader Version: 03
Sending auth...
Prepairing loader...
Sending loader...
Found port COM20
Detecting Chip Version...
Platform: MT6765: 0766.0000
HW version: 8A00.CA00.0000.0000
Connecting...
Target config: 00E5
Brom Version: 05
BootLoader Version: FE
Disabling protection...
Reconnecting phone...
Detecting Chip Version...
Platform: MT6765: 0766.0000
HW version: 8A00.CA00.0000.0000
Target config: 00E0
Prepairing loader...
Sending loader...
Executing loader...
Synchronizing with loader...
Device status: SYNC
Device status: brom
Initializing flash...
Initializing flash...
Sending loader...
Device status: SYNC
Reading info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC flash chip: .13014E47.314A3950.38100E30.2DA4188B
eMMC flash chip: Unknown: G1J9P8
Internal RAM size: 224 Kb
External RAM size: 3072 Mb
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Repair IMEI operation - you won't be able to restore the phone to
it's initial state, so proceed at your own risk.
Continue?
Reading partitions...
Reading SUPER partition...
Reading security area...
Reading 1/3...
Reading 2/3...
Reading 3/3...
Backup saved to "Q730TM_354590117777732_24-04-2021_10-
48-51.SEC"
Erasing part 1...
Erasing part 2...
Erasing part 3...
Erasing part 4...
To complete the operation, Please perform the following steps:
1. Please disconnect the USB cable, Power phone ON and
connect USB cable again.
2. Select "File transfer" connection mode.
3. Check, whether LGE Mobile USB Modem has appeared in
modems section on PC Device Manager.
4. Press "Ok" button.
New IMEI A: 359617-08-110916-5
Finalizing...
Performed by 3.1.1.03 Software version. |