Huawei Y5p 3g/4g not work only 2g after ID remove
... if i write his original oeminfo backup its relocked again and ask ID ... how solve this problem ????
here's his original oeminfo backup
****************************/file/14lbx...154b2.osp/file
heres a log
Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5212
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM7)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM7
Connecting;
Downloading DA;
Initializing;
Rid: 0f457946b4aab1915191e0bca9e154b2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: NEYyODczNzAyMEUzMkUxOTY5N0ZFRUJDQThGMjY3MUQ=
HW_STORAGE_EMMC: 0x684A0190 0x50613842 0x7F00013E 0xB367320F [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x158800000 SIZE: 0x5EF200000
Contents saved to :
C:\Noure\FURIOUS-GOLD\Pack6\PART_OEMINFO_HUAWEI DRA-LX9_0f457946b4aab1915191e0bca9e154b2_4_05_2021_12_ 59_09.osp
Formatting OEMINFO partition now...
Done;
Done;
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM7)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM7
Connecting;
Downloading DA;
Initializing;
Rid: 0f457946b4aab1915191e0bca9e154b2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: NEYyODczNzAyMEUzMkUxOTY5N0ZFRUJDQThGMjY3MUQ=
HW_STORAGE_EMMC: 0x684A0190 0x50613842 0x7F00013E 0xB367320F [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x158800000 SIZE: 0x5EF200000
Huawei ID removed ;
Formatting FRP partition now...
Done;
Factory Reset Protection successfully removed !
Time needed - 00:02:33
Log file saved to: LOG_4_05_2021_13_01_40.txt