PLEASE WHAT IS THE PROBLEM, I HAVE TRIED IT SEVERAL TIME.
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13
Load IDBase v8331 Ok!
Open : L6501-F6311-9.0-OP-V043-20210325_1207_user.pac
VER : BP_R1.0.0
LEN : 3.99 GiB
CPU : s9863a1h10
VER : L6501-F6311-9.0-OP-V043-20210325_1207-user
Reading package ...
Read package finished!
Patch Level : PPR1.180610.011
Display ID : L6501-F6311-9.0-OP-V043-20210325
Ver. Incmt : OP-V043-20210325
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2021-04-05
Build Time : 25.03.2021
Product Model : itel L6501
Product Brand : Itel
Product Name : F6311
Product Device : itel-L6501
Product Manfct : itel
Product Info : L6501
Product Board : L6501
Board Platform : sp9863a
Product Name : L6501
Product Device : L6501
Operation : Flash Firmware [ v2.13 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
>>> ERROR : Protocol HandShake failed!
>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Flash Firmware [ v2.13 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : L6501-F6311-9.0-OP-V043-20210325_1207_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0001
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x26
PMTMng : Update PMT Ok!
Prepare target ...
Prepare Ok!
CODE : prodnv.img
CODE : recovery.img
CODE : sharkl3_pubcp_LTEA_DSP.bin
CODE : cover.img
FSIMG : vendor.img
Failed to update block!
ERROR : 0000008E:00000000FF7F0000
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!
>>> Error : Flashing failed!
>>> Check previous message for more info!
Reconnect Power/Cable! |