[andre128]

Redmi 6A dead recovery

CPU : MT6765
Storage : EMMC
Scatter : F:\cereus_global_images_V11.0.5.0.PCGMIXM_20200916 .0000.00_9.0_global_41e1db1e83\cereus_global_image s_V11.0.5.0.PCGMIXM_20200916.0000.00_9.0_global\im ages\MT6765_Android_scatter.txt
DA Version : MTK_AllInOne_DA_v3.3001.2020/07/07.10:10
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM33
Port Name: MediaTek USB Port_V1633 (COM33)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_cereus_210721_171233.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone now...
Port : MediaTek USB Port_V1633 (COM33)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
[0] WRITE TO PARTITION [ preloader ]
Flashing Bootloader...
[3] WRITE TO PARTITION [ recovery ]
Flashing Firmware...
[17] WRITE TO PARTITION [ md1img ]
[18] WRITE TO PARTITION [ spmfw ]
[19] WRITE TO PARTITION [ scp1 ]
[20] WRITE TO PARTITION [ scp2 ]
[21] WRITE TO PARTITION [ sspm_1 ]
[22] WRITE TO PARTITION [ sspm_2 ]
[26] WRITE TO PARTITION [ vbmeta ]
[27] WRITE TO PARTITION [ lk ]
[28] WRITE TO PARTITION [ lk2 ]
[29] WRITE TO PARTITION [ boot ]
[30] WRITE TO PARTITION [ logo ]
[31] WRITE TO PARTITION [ odmdtbo ]
[32] WRITE TO PARTITION [ cust ]
[33] WRITE TO PARTITION [ tee1 ]
[34] WRITE TO PARTITION [ tee2 ]
[36] WRITE TO PARTITION [ vendor ]
[37] WRITE TO PARTITION [ system ]
[39] WRITE TO PARTITION [ cache ]
[40] WRITE TO PARTITION [ userdata ]
Flashing Done.
Disconnect cable and Power ON phone.