View Single Post
Old 09-08-2021, 06:28   #3 (permalink)
malka4u
No Life Poster
 
malka4u's Avatar
 
Join Date: Aug 2011
Location: bagmati pradesh
Posts: 3,296
Member: 1626780
Status: Offline
Thanks Meter: 1,275
CHANGE KG Selected Model : Samsung Galaxy A01
Code Name : SM-A015F/DS | SM-A015V | SM-A015G | SM-A015M | SM-A015T
Operation : Auth Flash
Authenticating... OK
Retrieving data... OK [245.27 KiB]
Initializing data... OK
Searching for HS-USB QDLoader 9008... COM108
Connection : USB 2.0 High-Speed
USB Driver : [Qualcomm Incorporated] qcusbser - Version : 2.1.2.0
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : 3937482787 SoC : [Snapdragon 439] [SDM439] [0x000BF0E1]
OEM : Samsung [0x0020] Model : Unknown [0x0000]
PK_HASH[0] :3CC959AC5B3364A42EC3CB40C091C90F
PK_HASH[1] :2A8101F1C1207C5C9ED1D2348AA10082
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:4096] [Host:1048576]
Reading partition map... OK
LU Count : 1
Reading info... FAIL
Changing KG Stage... OK
Please restore stock firmware via ODIN Mode!

Rebooting... OK

UNLOCKTOOL 2021.09.08.0
Elapsed time : 23 seconds






<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/104> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/104> Odin engine v(ID:3.1401)..
<ID:0/104> File analysis..
<ID:0/104> Total Binary size: 4200 M
<ID:0/104> SetupConnection..
<ID:0/104> Initialzation..
<ID:0/104> Set PIT file..
<ID:0/104> DO NOT TURN OFF TARGET!!
<ID:0/104> Get PIT for mapping..
<ID:0/104> Firmware update start..
<ID:0/104> NAND Write Start!!
<ID:0/104> SingleDownload.
<ID:0/104> aboot.mbn
<ID:0/104> sbl1.mbn
<ID:0/104> rpm.mbn
<ID:0/104> tz.mbn
<ID:0/104> devcfg.mbn
<ID:0/104> cmnlib_30.mbn
<ID:0/104> cmnlib64_30.mbn
<ID:0/104> km4.mbn
<ID:0/104> apdp.mbn
<ID:0/104> msadp.mbn
<ID:0/104> NON-HLOS.bin
<ID:0/104> sec.dat
<ID:0/104> adspso.bin
<ID:0/104> bksecapp.mbn
<ID:0/104> vaultkeeper.mbn
<ID:0/104> boot.img
<ID:0/104> dtbo.img
<ID:0/104> recovery.img
<ID:0/104> super.img
<ID:0/104> userdata.img
<ID:0/104> vbmeta.img
<ID:0/104> metadata.img
<ID:0/104> modem.bin
<ID:0/104> cache.img
<ID:0/104> omr.img
<ID:0/104> prism.img
<ID:0/104> optics.img
<ID:0/104> RQT_CLOSE !!
<ID:0/104> RES OK !!
<ID:0/104> Removed!!
<ID:0/104> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)


  Reply With Quote
 
Page generated in 0.07885 seconds with 7 queries