View Single Post
Old 09-22-2021, 00:28   #2 (permalink)
Franky_36
Product Supporter
 
Franky_36's Avatar
 
Join Date: Dec 2016
Posts: 2,106
Member: 2665389
Status: Offline
Thanks Meter: 2,342
Quote:
Originally Posted by ahmadge View Post
Code:
Waiting for bootrom usb device... ok
BootMode : BootRom[COM13]
USBDriver : wdm_usb:ver:3.0.1437.1:09/11/2014
Downloading BootRom Da data...
BootRom successfully connected!
Receiving boot Information... 
ChipID 	:   MT6765
Storage 	:   EMMC
UA Size 	:   58.24 GB
DRAM 	:   3.00 GB
SRAM 	:   512.00 KB
Boot1 	:   4.00 MB
Boot2 	:   4.00 MB
Rpmb 	:   16.00 MB
RNID 	:   A6F745DA3B4C9182BF2FE81EED6ACB6B
Emmc Cid 	:   90014A68433861503E01000113FB57FD
Emmc Oem 	:   hC8aP>
Emmc Vid 	:   SKHYNIX
Reading PMT Information ...	
PMT Read OK [Type:64Bit] [Part Count:58]
EMI Info 	:   preloader_k62v1_64_mex_a32_V35
Fixing Huawei ID Data...	WriteMemory:[STATUS_OPEN_FILE_ERR]
write error
Rebooting phone ...	OK
here id remove logo
Code:
Waiting for bootrom usb device... ok
BootMode : BootRom[COM13]
USBDriver : wdm_usb:ver:3.0.1437.1:09/11/2014
Downloading BootRom Da data...
BootRom successfully connected!
Receiving boot Information... 
ChipID 	:   MT6765
Storage 	:   EMMC
UA Size 	:   58.24 GB
DRAM 	:   3.00 GB
SRAM 	:   512.00 KB
Boot1 	:   4.00 MB
Boot2 	:   4.00 MB
Rpmb 	:   16.00 MB
RNID 	:   A6F745DA3B4C9182BF2FE81EED6ACB6B
Emmc Cid 	:   90014A68433861503E01000113FB57FD
Emmc Oem 	:   hC8aP>
Emmc Vid 	:   SKHYNIX
Reading PMT Information ...	
PMT Read OK [Type:64Bit] [Part Count:58]
EMI Info 	:   preloader_k62v1_64_mex_a32_V35
Removing Huawei ID  ...	OK

wait until phone power on

set password screenlock

reboot your phone and do Fix Huawei ID

Rebooting phone ...	OK
Good, follow the indications as in the log of the following link that I leave you below.

https://forum.gsmhosting.com/vbb/f10...-done-2925319/

Any problem or doubt, write again in this same thread, post screenshots and complete log of the operations you do, thank you very much and greetings.

BR
  Reply With Quote
The Following User Says Thank You to Franky_36 For This Useful Post:
 
Page generated in 0.08373 seconds with 7 queries