GSM-Forum - View Single Post - ★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★

bruno santana · 10-15-2021, 20:47

Positivo s532 Twist 2 Pro
flash done
processador 1.3 GHz Quad Core
chipset Cortex-A7 Unisoc SC7731E

EXE: Ultimate Unisoc Module v0.1
ACTION: Flash Firmware.
Selected firmware: 7731E_fs286m71_demo_0023165_256x8_V01_4X2_GPS_PLS_ 2SIM_20210519_1016.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM86)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:05] Loader ok
[00:00:05] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:05] [1]First boot done.
[00:00:05] Sending second loader.
[00:00:10] Second loader sent ok.
New flash protocol detected.
[00:00:10] Reading: system
System name: system
Phone and firmware have same android
[00:00:10] Reading: miscdata
[00:00:10] Reading: w_fixnv1
NVRAM saved to: C:\Users\Bruno\Documents\spreadtrum_module\flashmo de_nvram_backup\_353706100905053\_353706100905053_ nvram_backup.tar
[00:00:22] Start write: w_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:26] Start write: prodnv
[00:00:27] Format: uboot
[00:00:27] [uboot]Format OK.
[00:00:27] Format: uboot_log
[00:00:27] [uboot_log]Format OK.
[00:00:27] Start write: splloader
[00:00:27] Start write: vbmeta
[00:00:28] Start write: w_modem
[00:00:33] Start write: w_deltanv
[00:00:33] Start write: w_gdsp
[00:00:36] Start write: pm_sys
[00:00:38] Start write: gpsgl
[00:00:38] Start write: gpsbd
[00:00:39] Start write: wcnmodem
[00:00:40] Start write: boot
[00:00:51] Start write: recovery
[00:01:02] Start write: system
[00:09:17] Start write: customerdata
[00:09:19] Start write: userdata
[00:09:32] Start write: logo
[00:09:33] Start write: fbootlogo
[00:09:33] Start write: cache
[00:09:35] Start write: vendor
[00:10:31] Format: w_runtimenv1
[00:10:31] [w_runtimenv1]Format OK.
[00:10:31] Format: misc
[00:10:31] [misc]Format OK.
[00:10:31] Start write: trustos
[00:10:31] Start write: sml
[00:10:32] Start write: uboot
[00:10:32] Start write: persist
[00:10:33] Start write: fbootlogo3
[00:10:33] Start write: fbootlogo4
[00:10:34] Start write: fbootlogo5
[00:10:34] Start write: UDC_config
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\Bruno\Documents\spreadtrum_module\Saved_L ogs\_writepac_.txt
Total Time: 00:10:34
Done.

10-15-2021, 20:47	#10419 (permalink)
bruno santana No Life Poster Join Date: Aug 2014 Location: brazil - brasilia Posts: 1,056 Member: 2235684 Status: Offline Thanks Meter: 417	Positivo s532 Twist 2 Pro flash done processador 1.3 GHz Quad Core chipset Cortex-A7 Unisoc SC7731E EXE: Ultimate Unisoc Module v0.1 ACTION: Flash Firmware. Selected firmware: 7731E_fs286m71_demo_0023165_256x8_V01_4X2_GPS_PLS_ 2SIM_20210519_1016.pac NV: Default Mode (protect calibration) Device Storage: EMMC Start Detect phone. Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM86) [00:00:00] Sending loader. BOOT: SPRD3 Sending loader, keep boot key untill loader start. [00:00:05] Loader ok [00:00:05] Wait for loader.... Loader OK: ~"Spreadtrum Boot Block version 1.1 Changing bautrate OK. [00:00:05] [1]First boot done. [00:00:05] Sending second loader. [00:00:10] Second loader sent ok. New flash protocol detected. [00:00:10] Reading: system System name: system Phone and firmware have same android [00:00:10] Reading: miscdata [00:00:10] Reading: w_fixnv1 NVRAM saved to: C:\Users\Bruno\Documents\spreadtrum_module\flashmo de_nvram_backup\_353706100905053\_353706100905053_ nvram_backup.tar [00:00:22] Start write: w_fixnv1 Protecting GSM_CALI_ITEM_ID id: 0x2 Protecting W_Calibration id: 0x12D Protecting AFC id: 0x9C7 Protecting BlueTooth id: 0x191 Protecting BandSelect id: 0xD Protecting WIFI id: 0x199 Protecting MMITest id: 0x19A Protecting WIFICal1 id: 0x19F Protecting WIFICal2 id: 0x1A0 Protecting WIFICal3 id: 0x1A1 [00:00:26] Start write: prodnv [00:00:27] Format: uboot [00:00:27] [uboot]Format OK. [00:00:27] Format: uboot_log [00:00:27] [uboot_log]Format OK. [00:00:27] Start write: splloader [00:00:27] Start write: vbmeta [00:00:28] Start write: w_modem [00:00:33] Start write: w_deltanv [00:00:33] Start write: w_gdsp [00:00:36] Start write: pm_sys [00:00:38] Start write: gpsgl [00:00:38] Start write: gpsbd [00:00:39] Start write: wcnmodem [00:00:40] Start write: boot [00:00:51] Start write: recovery [00:01:02] Start write: system [00:09:17] Start write: customerdata [00:09:19] Start write: userdata [00:09:32] Start write: logo [00:09:33] Start write: fbootlogo [00:09:33] Start write: cache [00:09:35] Start write: vendor [00:10:31] Format: w_runtimenv1 [00:10:31] [w_runtimenv1]Format OK. [00:10:31] Format: misc [00:10:31] [misc]Format OK. [00:10:31] Start write: trustos [00:10:31] Start write: sml [00:10:32] Start write: uboot [00:10:32] Start write: persist [00:10:33] Start write: fbootlogo3 [00:10:33] Start write: fbootlogo4 [00:10:34] Start write: fbootlogo5 [00:10:34] Start write: UDC_config Flashing done. [can take 0-10 sec]Wait untill phone restart. Log saved: C:\Users\Bruno\Documents\spreadtrum_module\Saved_L ogs\_writepac_.txt Total Time: 00:10:34 Done.