CM2 Spd 2.14 cant read FW Operation : Read FW [ v2.14 ]
Extra : Ignore CriticalPart Verify : Enabled
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
>>> ERROR : Protocol HandShake failed!
>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
need an urgent help guys i have 2 mobiles 1 is hang on logo and another one is completly working its VNUS mobile S50 but i can't read FW because its showing an error |