GSM-Forum - View Single Post - [21-12-21] UMTv2 / UMTPro UltimateMTK v4.8

pcuse8 · 02-03-2022, 02:57

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM12 [MediaTek USB Port (COM12)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&26b6925d&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0717, [MT6761/MT6762/MT3369/MT8766B] [Helio A20/P22/A22/A25/G25]
Hardware Info: 0x8A00, 0xCA01, 0x200
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: AA610B7777D1C6A90419363DA36766D4
Preparing device...
-- Success!
Preloader saved as : preloader_x657c_h6117_220202_202631.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM12)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.7]

02-03-2022, 02:57	#49 (permalink)
pcuse8 Freak Poster Join Date: Dec 2021 Location: Bamako Mali Posts: 144 Member: 3003818 Status: Offline Sonork: 100.28977 Thanks Meter: 86	Infinix x657c frp done UMT KING Operation : MTK One Click Hold VOL UP + DOWN and connect USB Cable. Some phone may have different key combination for BROM mode. Waiting for device in BROM mode... Port: COM12 [MediaTek USB Port (COM12)] Device Path: \\?\usb#vid_0e8d&pid_0003#6&26b6925d&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73} Chipset: 0x0717, [MT6761/MT6762/MT3369/MT8766B] [Helio A20/P22/A22/A25/G25] Hardware Info: 0x8A00, 0xCA01, 0x200 Config : [SecureBoot: True] [SLA: False] [DA Auth: True] MEID: AA610B7777D1C6A90419363DA36766D4 Preparing device... -- Success! Preloader saved as : preloader_x657c_h6117_220202_202631.bin DA : MTK_AllInOne_DA.bin Waiting for Phone in Flash Mode... Connect Power Off phone within 30 secs... Port : MediaTek USB Port (COM12) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Syncing with Target... Reading Partition Table... Storage : eMMC Reading Information... -- Could not read! Userdata is ENCRYPTED Seeking FRP Data... Resetting FRP... - Success! Disconnect Battery/Cable and Power On Phone. [UltimateMTK Ver. 4.7]