Quote:
Originally Posted by Octopus support  Hello.
Try to repeat operation once again and post here results.
Please, follow attentively Software instructions and don't use any USB hubs. Use directly USB Port in motherboard. |
alredy tried on 2 diferent computers direct on 3.1 usb port, tried with other cables, reinstall latest version of OctoLG same:
Phone found at port COM9
Mode: Emergency
Initializing flash...OK
Model ID: LM-K420EMW
Platform: mt6765
Code name: meh15lm
Android version: 11
SW version: LMK420EMWAT-00-V20c-EUR-XX-JAN-11-2022+0
LAF Version: 1.1
Product ID: 0B5AD021RFBR06PDX
IMEI: 356587-11-192109-0
Target operator: LAO
Hardware: rev_11
Battery level: 72%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 356587-11-192109-0
IMEI B: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Checking operation...
Trying second method...
Checking Resource File...
Step 1...
Step 2...
Please, disconnect cable, then press "Ok" button
Connecting to server 0...OK
Octopus smart card is present.
Checking smart card...OK
Username: alfamobil
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 150 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Please, connect powered OFF phone with USB cable.
Found port COM9
Detecting Chip Version...
Platform: MT6765: 0766.0000
HW version: 8A00.CA00.0000.0000
Connecting...
Target config: 0005
Brom Version: FF
BootLoader Version: 03
Sending auth...
Prepairing loader...
Sending loader...
Performed by 3.1.7 Software version.
after conecting second time phone just power up and few seconds later finished.