HERE LOG
EVEN TRY 12 BOOT SOME TIME DONE SOME TIME ERROR
Code:
Welcome to Octoplus Huawei Software v.1.3.0
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
2: COM4 USB Serial Port
3: COM76 RIM Virtual Serial Port v2
4: COM82 RIM Virtual Serial Port v2
Job ID: 0000000001ACBE9B
2022-04-26 05:54:35
Starting Reset Huawei ID
Selected phone model: JNY-LX1
Selected method: Reset Huawei Id (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN810_V3...
Initializing remote service connection...
Checking resource information...
Writing XLOADER partition...
Reset Huawei ID failed.
Performed by 1.3.0 Software version.
Job ID: 0000000001ACBEDB
2022-04-26 05:56:22
Starting Reset Huawei ID
Selected phone model: JNY-LX1
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN810_V2...
Initializing remote service connection...
Checking resource information...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7TSX212V019464
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: JNY-LX1
System: JNY-L01 12.0.0.220(C16E3R2P2)
Android Version: 10
Base Version: JNY-LGRP2-OVS 102.0.0.220
Custom Version: JNY-L01-CUST 102.0.0.3(C16)
Preload Version: JNY-L01-PRELOAD 102.0.0.2(C16R2)
C_Version: C16
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Checking resource information...
Connecting to the credit server...
Username: CH_ARSHAD
Checking balance...
Your balance: 190 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: JNY-LX1
System: JNY-L01 12.0.0.220(C16E3R2P2)
Resetting Huawei ID...
Rebooting device...
Reset Huawei ID done.
Performed by 1.3.0 Software version.