GSM-Forum - View Single Post

Svito · 04-27-2022, 22:48

Welcome to Octoplus Huawei Software v.‪1.3.0‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 USB Serial Port

Job ID: 0000000001AEFAEC
2022-04-27 21:37:55
Starting Reset Huawei ID
Selected phone model: ‪PPA-LX2‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Checking resource information...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in porgress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: CNXNU20C18102201
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...

Device Model: ‪PPA-LX2‬
System: ‪PPAH-L22 10.1.1.229(C432E4R7P1)‬
Android Version: ‪10‬
Base Version: ‪PPAH-LGRP2-OVS 10.1.1.229‬
Custom Version: ‪PPAH-L22-CUST 10.1.1.4(C432)‬
Preload Version: ‪PPAH-L22-PRELOAD 10.1.1.1(C432R4)‬
C_Version: ‪C432‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Checking resource information...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪PPA-LX2‬
System: ‪PPAH-L22 10.1.1.229(C432E4R7P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪865xxxxxxxxxxxxx
IMEI B: ‪86xxxxxxxxxxxxx‬x
S/N: ‪CNXNU20C18102201‬
Resetting Huawei ID...
Rebooting device...

Reset Huawei ID done.
Performed by ‪1.3.0‬ Software version.

04-27-2022, 22:48	#26 (permalink)
Svito Freak Poster Join Date: May 2004 Location: Slovakia Age: 45 Posts: 327 Member: 66497 Status: Offline Thanks Meter: 81	Welcome to Octoplus Huawei Software v.‪1.3.0‬ To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: ##14789632## ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' Found COM ports: 1: COM3 USB Serial Port Job ID: 0000000001AEFAEC 2022-04-27 21:37:55 Starting Reset Huawei ID Selected phone model: ‪PPA-LX2‬ Searching HUAWEI USB COM 1.0 port... Detected ‪HUAWEI USB COM 1.0‬ port Phone connect successfully Writing bootloader KIRIN710A_V3... Initializing remote service connection... Checking resource information... Writing ‪XLOADER‬ partition... Writing ‪UCE‬ partition... Writing ‪FASTBOOT‬ partition... Operation in porgress. Please wait for instructions... Bootloader Update successfully Rebooting to fastboot mode... Searching Fastboot devices... Found android device: CNXNU20C18102201 Detected ‪Android Sooner Single ADB Interface‬ port Reading basic data... Device Model: ‪PPA-LX2‬ System: ‪PPAH-L22 10.1.1.229(C432E4R7P1)‬ Android Version: ‪10‬ Base Version: ‪PPAH-LGRP2-OVS 10.1.1.229‬ Custom Version: ‪PPAH-L22-CUST 10.1.1.4(C432)‬ Preload Version: ‪PPAH-L22-PRELOAD 10.1.1.1(C432R4)‬ C_Version: ‪C432‬ D_Version: ‪D000‬ FB Lock State: ‪LOCKED‬ User Lock State: ‪LOCKED‬ Checking resource information... Connecting to the credit server... Username: Default_user Checking balance... Your balance: 0 credits Sending device information... Sending firmware information... To perform this operation you need to have: 0 credits. Removing firmware protection... Connecting to server... Waiting for a response from the server... FB Lock State: ‪UNLOCKED‬ User Lock State: ‪LOCKED‬ Device Model: ‪PPA-LX2‬ System: ‪PPAH-L22 10.1.1.229(C432E4R7P1)‬ MEID: ‪00000000000000‬ IMEI A: ‪865xxxxxxxxxxxxx IMEI B: ‪86xxxxxxxxxxxxx‬x S/N: ‪CNXNU20C18102201‬ Resetting Huawei ID... Rebooting device... Reset Huawei ID done. Performed by ‪1.3.0‬ Software version.