GSM-Forum - View Single Post

Punto-Móvil · 05-14-2022, 19:11

Welcome to Octoplus FRP Tool v.2.1.2.0
Card S/N: 00039951
Work ID: 0000000001C24FF4
Platform: HUAWEI
Selected model: WAS-LX1A
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: WAS-LX1A
Phone SN: H3XDUXXXXXXXXXX
Phone IMEI: 864XXXXXXXX
Phone IMEI2: 000XXXXXXXX
SW version: WAS-LX1A 8.0.0.365(C40)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 2.1.2.0 Software version.

05-14-2022, 19:11	#1 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,056 Member: 1147852 Status: Offline Thanks Meter: 589	Anoter huawei was lx1a easy frp done Welcome to Octoplus FRP Tool v.2.1.2.0 Card S/N: 00039951 Work ID: 0000000001C24FF4 Platform: HUAWEI Selected model: WAS-LX1A Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: WAS-LX1A Phone SN: H3XDUXXXXXXXXXX Phone IMEI: 864XXXXXXXX Phone IMEI2: 000XXXXXXXX SW version: WAS-LX1A 8.0.0.365(C40) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 2.1.2.0 Software version.