| Frp tab ex7sl4-exceed done
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : EX7SL4-EXCEED-20190409
Ver. Incmt : 03410
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-01-05
Build Time : 09.04.2019
Product Model : EX7SL4
Product Brand : EXCEED
Product Name : EX7SL4
Product Device : EX7SL4
Product Manfct : EXCEED
Product Info : EX7SL4
Product Board : sp7731e_1h10
Board Platform : sp7731e
NVMng : SecurityInfo
IMEI[1] : 354063102036423
IMEI[2] : 354063102036431
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4
Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem
MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4 _P2_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:59
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:19
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : EX7SL4-EXCEED-20190409
Ver. Incmt : 03410
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-01-05
Build Time : 09.04.2019
Product Model : EX7SL4
Product Brand : EXCEED
Product Name : EX7SL4
Product Device : EX7SL4
Product Manfct : EXCEED
Product Info : EX7SL4
Product Board : sp7731e_1h10
Board Platform : sp7731e
AndroidVer : 8
VlnrLevel : 0x00
SP7731E__EXCEED__EX7SL4__8.1.0__EX7SL4-EXCEED-20190409__OPM2.171019.012__EX7SL4
Read : prodnv.img
ExtSparse : Compression ratio : 23%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 79%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 71%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin
Firmware size : 0x6003E51C ( 1.50 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:11:16 |