After removed FRP in "FACTORY MODE" (Test Point), device Not Boot up more and give "RED SCREEN" or "Erecovery Mode", Firmware inside too much high and not find in anyside.
SO, HAVE Download other firmware ANE-LX1 more low and have Flashed in "FACTORY MODE" (COM1), becouse in COM1 can flash any Firmware, also more Low.
Process goes good, also at the end SW writed Process Failed.
Power Up device and all was ok, with his Original firmware, his IMEIS, Network perfect, ALL OK, Device Repaired from "PASSWORD LOCK" + "FRP" and Boot up perfect. SUCCESS on COM1
1) LOG: Code:
Job ID: 00000000017F1491
2022-06-20 18:47:16
Starting Write Firmware(Factory mode)
Selected phone model: ANE-LX1
Selected base update file: C:/Users/NETUSER/Desktop/UPDATE.APP
Selected cust update file: C:/Users/NETUSER/Desktop/update_ANE-L01_hw_eu.app
PACKAGE_TYPE: OFFLINE_UPDATE
VERLIST : ANE_GLOBAL_CUST 9.1.0(C999)
PACKAGE_TYPE: OFFLINE_UPDATE
VERLIST : ANE_GLOBAL_CUST 9.1.0(C999)
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN659_A8.0_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 9WV7N1860
Device Model: ANE-LX1
System: ?ANE-LX1 9.1.0.379(C432E7R1P7)
MEID: 00000000000000
IMEI A: 863675
IMEI B: 863675
S/N: ?9WV7N1860
Writing PTABLE partition...
Writing XLOADER partition...
Writing FW_LPM3 partition...
Writing FASTBOOT partition...
Writing VBMETA partition...
Writing MODEMNVM_UPDATE partition...
Writing TEEOS partition...
Writing TRUSTFIRMWARE partition...
Writing SENSORHUB partition...
Writing FW_HIFI partition...
Writing DTS partition...
Writing KERNEL partition...
Writing RECOVERY_RAMDISK partition...
Writing RECOVERY_VENDOR partition...
Writing RECOVERY_VBMETA partition...
Writing ENG_VENDOR partition...
Writing ENG_SYSTEM partition...
Writing CACHE partition...
Writing SYSTEM partition...
Writing 1 chunk from 6...
Writing 2 chunk from 6...
Writing 3 chunk from 6...
Writing 4 chunk from 6...
Writing 5 chunk from 6...
Writing 6 chunk from 6...
Writing CUST partition...
Writing MODEM_FW partition...
Writing VENDOR partition...
Writing 1 chunk from 2...
Writing 2 chunk from 2...
Writing VERSION partition...
Writing ODM partition...
Writing PREAS partition...
Writing 1 chunk from 3...
Writing 2 chunk from 3...
Writing 3 chunk from 3...
Writing PREAVS partition...
Writing PRELOAD partition...
Writing ERECOVERY_KERNEL partition...
Writing ERECOVERY_RAMDISK partition...
Writing ERECOVERY_VENDOR partition...
Writing ERECOVERY_VBMETA partition...
Erasing ?USERDATA? partition..
Writing USERDATA partition...
Writing PATCH partition...
Writing VERSION partition...
Writing PRELOAD partition...
Erasing USERDATA partition..
Writing USERDATA partition...
Writing 1 chunk from 2...
Writing 2 chunk from 2...
Switching to Upgrade Mode...
Writing ERECOVERY files...
Write Firmware(Factory mode) failed.(Also say Failed is SUCCESS, due my Pc problem)
Performed by 1.2.9 Software version.
Br
Allumts