Hello everyone i tried to connect this phone to reset phone but box not detect the phone everything soldier correctly using this guy setup
https://forum.gsmhosting.com/vbb/f67...-jtag-3025875/ but failed to connect CMD Timeout Error
Quote:
eMMC_tool ver. 2.0.1.0 (release date: 05.05.2021)
Microsoft Windows 10 (64 bit) build 22000 (10.0.22000.708)
Looking for EasyJTAG box...
EasyJTAG API ver. 3403
EasyJTAG Box Serial = 17FFF01A8601862E
Card Serial = AAEA1B3C
EasyJTAG Box Firmware = 1.6300
Changelog:
05/05/2021 (ver 1.6.6.0)
Add: New keys for Oppo unpack
Fix: Bugs that have been found through your crash report
05.05.2021 (ver 2.0.1.0)
Add: Vendor LG
Add: Mediatek Preloader Parser
Add: OnePlus Unpacker
Add: Xiaomi Custom EDL Authorization
Add: Xiaomi Remove Mi Account (only Qualcomm)
Operation: Connect to Z3X EasyJtag
Setting Interface to EasyJtag1/ISP
Setting IO Levels to 1.8V
Setting Frequence to 21 Mhz
Setting BusWidth to 1 Bit
CMD Pullup Level: 1660 mV
CMD Active Level: 1742 mV
Setting HS Timing to Enabled
Can't init device. Error: -1. Reason: CMD Timeout Error
Operation: Connect to Z3X EasyJtag
Setting Interface to EasyJtag1/ISP
Setting IO Levels to 1.8V
Setting Frequence to 21 Mhz
Setting BusWidth to 1 Bit
CMD Pullup Level: 1691 mV
CMD Active Level: 1742 mV
Setting HS Timing to Enabled
Can't init device. Error: -1. Reason: CMD Timeout Error
Operation: Connect to Z3X EasyJtag
Setting Interface to EasyJtag1/ISP
Setting IO Levels to 1.8V
Setting Frequence to 21 Mhz
Setting BusWidth to 1 Bit
CMD Pullup Level: 1660 mV
CMD Active Level: 1742 mV
Setting HS Timing to Enabled
Can't init device. Error: -1. Reason: CMD Timeout Error
Operation: Connect to Z3X EasyJtag
Setting Interface to EasyJtag1/ISP
Setting IO Levels to 2.8V
Setting Frequence to 21 Mhz
Setting BusWidth to 1 Bit
CMD Pullup Level: 2660 mV
CMD Active Level: 2732 mV
Setting HS Timing to Enabled
Can't init device. Error: -1. Reason: CMD Timeout Error
|
apricated any help please
Best Regards | Yoba