Log file "C:\Program Files (x86)\Octoplus\Octoplus_LG\LOG\18-10-2022_07-41-30.log" created.
10/18/2022 7:41:33 AM > Searching for server...
10/18/2022 7:41:33 AM > Trying to ping server...010/18/2022 7:41:34 AM > ok
10/18/2022 7:41:34 AM > Trying connect to server...
10/18/2022 7:41:35 AM > Searching installed cards...
10/18/2022 7:41:35 AM > Found card with s/n: 0202817F
10/18/2022 7:41:35 AM > Server check...
10/18/2022 7:41:35 AM > Server Check succesfull!
10/18/2022 7:41:35 AM > Server Check succesfull!
10/18/2022 7:41:38 AM > Welcome to Octoplus/Octopus Box LG Software version 3.2.0
10/18/2022 7:41:38 AM > Card S/N : 000202817F
10/18/2022 7:41:49 AM > INI FUpdateInfo Done!
10/18/2022 7:41:49 AM > INI FShowUpdateInfo start
10/18/2022 7:41:49 AM > INI FShowInfo start
10/18/2022 7:41:49 AM > INI FShowInfo show News Form
10/18/2022 7:46:33 AM > --------------------------------------------------------------------------------
10/18/2022 7:46:33 AM > Connecting to server 0...10/18/2022 7:46:35 AM > OK
10/18/2022 7:46:35 AM > Username: oct_dFQuzPo
10/18/2022 7:46:35 AM > Authorizing...10/18/2022 7:46:38 AM > OK
10/18/2022 7:46:38 AM > Checking balance...10/18/2022 7:46:39 AM > OK
10/18/2022 7:46:39 AM > Your balance: 0 credits.
10/18/2022 7:46:51 AM > --------------------------------------------------------------------------------
10/18/2022 7:46:51 AM > Selected USB connection type
10/18/2022 7:46:53 AM > Transport: Connected
10/18/2022 7:46:54 AM > Authorized.
10/18/2022 7:46:56 AM > Work ID: 0000000001B0961F
10/18/2022 7:46:57 AM > Checking data...10/18/2022 7:46:58 AM > OK
10/18/2022 7:46:58 AM > Platform: LG MTK
10/18/2022 7:46:58 AM > Selected port: COM6
10/18/2022 7:46:58 AM > Selected baudrate: 0
10/18/2022 7:46:58 AM > Selected model: K500MM
10/18/2022 7:46:58 AM > Checking Resource File...
10/18/2022 7:47:00 AM > Check FTP file List
10/18/2022 7:47:01 AM > FTP file List is obtained!
10/18/2022 7:47:01 AM > Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual.
2. Connect USB cable.
3. Release testpoint after 3-5 seconds.
10/18/2022 7:47:56 AM > Performed by 3.2.0 Software version.
10/18/2022 7:47:56 AM > Elapsed Time: 12:01:05 AM
10/18/2022 7:48:59 AM > --------------------------------------------------------------------------------
10/18/2022 7:48:59 AM > Selected USB connection type
10/18/2022 7:49:01 AM > Transport: Connected
10/18/2022 7:49:02 AM > Authorized.
10/18/2022 7:49:02 AM > Work ID: 00000000018E8643
10/18/2022 7:49:03 AM > Checking data...10/18/2022 7:49:04 AM > OK
10/18/2022 7:49:04 AM > Platform: LG MTK
10/18/2022 7:49:04 AM > Selected port: COM6
10/18/2022 7:49:04 AM > Selected baudrate: 0
10/18/2022 7:49:04 AM > Selected model: K500MM
10/18/2022 7:49:04 AM > Checking Resource File...
10/18/2022 7:49:05 AM > Check FTP file List
10/18/2022 7:49:06 AM > FTP file List is obtained!
10/18/2022 7:49:06 AM > Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual.
2. Connect USB cable.
3. Release testpoint after 3-5 seconds.
10/18/2022 7:49:16 AM > Found port COM11
10/18/2022 7:49:16 AM > Detecting Chip Version...
10/18/2022 7:49:16 AM > Platform: MT6765: 0766.0000
10/18/2022 7:49:16 AM > HW version: 8A00.CA00.0000.0000
10/18/2022 7:49:16 AM > Connecting...
10/18/2022 7:49:16 AM > Target config: 00E5
10/18/2022 7:49:16 AM > Brom Version: 05
10/18/2022 7:49:16 AM > BootLoader Version: FE
10/18/2022 7:49:16 AM > Disabling protection...
10/18/2022 7:49:17 AM > Reconnecting phone...
10/18/2022 7:49:17 AM > Detecting Chip Version...
10/18/2022 7:49:17 AM > Platform: MT6765: 0766.0000
10/18/2022 7:49:17 AM > HW version: 8A00.CA00.0000.0000
10/18/2022 7:49:17 AM > Target config: 00E0
10/18/2022 7:49:17 AM > Prepairing loader...
10/18/2022 7:49:17 AM > Sending loader...
10/18/2022 7:49:18 AM > DA send successfully
10/18/2022 7:49:18 AM > Executing loader...
10/18/2022 7:49:18 AM > Synchronizing with loader...
10/18/2022 7:49:19 AM > Device status: SYNC
10/18/2022 7:49:19 AM > Device status: brom
10/18/2022 7:49:19 AM > Initializing flash...
10/18/2022 7:49:20 AM > Initializing flash...
10/18/2022 7:49:20 AM > Sending loader...
10/18/2022 7:49:20 AM > Device status: SYNC
10/18/2022 7:49:20 AM > Reading info...
10/18/2022 7:49:20 AM > EMMC rpmb size: 4 Mb
10/18/2022 7:49:20 AM > EMMC boot1 size: 4 Mb
10/18/2022 7:49:20 AM > EMMC boot2 size: 4 Mb
10/18/2022 7:49:20 AM > EMMC gp1 size: 0 Mb
10/18/2022 7:49:20 AM > EMMC gp2 size: 0 Mb
10/18/2022 7:49:20 AM > EMMC gp3 size: 0 Mb
10/18/2022 7:49:20 AM > EMMC gp4 size: 0 Mb
10/18/2022 7:49:20 AM > EMMC user area size: 29820 Mb
10/18/2022 7:49:20 AM > eMMC flash chip: .15010047.58364241.4209F162.F2E6B757
10/18/2022 7:49:20 AM > eMMC flash chip: Unknown: GX6BAB
10/18/2022 7:49:20 AM > Internal RAM size: 232 Kb
10/18/2022 7:49:20 AM > External RAM size: 3072 Mb
10/18/2022 7:49:20 AM > Reading partitions...
10/18/2022 7:49:21 AM > Reading SUPER partition...
10/18/2022 7:49:21 AM > Reading info...
10/18/2022 7:49:24 AM > Searching Build.prop
10/18/2022 7:49:24 AM > Search system
10/18/2022 7:49:24 AM > Search android
10/18/2022 7:49:24 AM > Search system_a
10/18/2022 7:49:24 AM > FTPUploader: Starting upload
10/18/2022 7:49:24 AM > Getting file /build.prop
10/18/2022 7:49:24 AM > Start searcing...
10/18/2022 7:49:25 AM > Error getting File Addres!
10/18/2022 7:49:25 AM > Getting file /system/build.prop
10/18/2022 7:49:25 AM > Start searcing...
10/18/2022 7:49:26 AM > Brand: lge
10/18/2022 7:49:26 AM > Manufacturer: LGE
10/18/2022 7:49:26 AM > Model: LM-K500
10/18/2022 7:49:26 AM > Device: mdh30xlm
10/18/2022 7:49:26 AM > Android version: 11
10/18/2022 7:49:26 AM > SW version: LMK500MMAT-02-V20f-310-160-OCT-30-2021-ARB00+0
10/18/2022 7:49:26 AM > IMEI: 355041-61-XXXXXX-4
10/18/2022 7:50:51 AM > Opening "LMK500MMAT-02-V20f-310-160-OCT-30-2021-ARB00+0_preloader.orf"...
10/18/2022 7:50:51 AM > Writing boot...
10/18/2022 7:50:51 AM > AllowWrite operation started
10/18/2022 7:50:51 AM > 0007 : 0000200000002000
10/18/2022 7:50:52 AM > Image result: 0x0
10/18/2022 7:50:52 AM > Performed by 3.2.0 Software version.
10/18/2022 7:50:52 AM > Elapsed Time: 12:01:52 AM
10/18/2022 8:01:58 AM > Access violation at address 00C5B85B in module 'OctoplusLG.exe'. Read of address 00000004
///////////////////////////////////////////////////////////////////////////////////////////////////////////////
----here the phone alive and ON reading info by DOWNLOAD MODE:---
Welcome to Octoplus/Octopus Box LG Software version 3.2.0
Card S/N : 000202817F
--------------------------------------------------------------------------------
Selected USB connection type
Platform: LG MTK
Selected port: COM6
Selected baudrate: 921600
Selected model: K500MM
Connecting to phone...
Mode: Normal
Switching to Download mode...
Phone found at port COM27
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Code name: mdh30xlm
Android version: 11
SW version: LMK500MMAT-02-V20f-310-160-OCT-30-2021-ARB00+0
LAF Version: 1.1
Product ID: WI20S210312006292
IMEI: 355041-61-XXXXXX-4
Target operator: LAO
Hardware: rev_10
Battery level: 96%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 355041-61-978430-4
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Performed by 3.2.0 Software version.
-----------------FOR FIRST TIME STEP BY STEP----------------------
1- Down grade android 12 (v30c) sep-07-2022, to android 11 Android 11 (v20f) oct-30-2021 USING LGUP
2- ADD 20 credits to your octolus to remove FRP (OR DOIT MANUAL)
3- MAKE SURE your credits, user and pasword are right and ready.
4- select the model LM-K500MM, HIT the testpiont option and then hit FRP. // FOLLOW INSTRUCTIONS
5- AFTER THAT your divice will be on BROOM MODE. - dont be scare.! /// FRP is already removed at this point. now wi have to unbrick the device or get ot of BROOM MODE.
6- Mark operation via test point., and hit preloader w unpluged phone
7- now do Test point and at the same time plug the phone ., OCTOPLUS LG will ask for the file .... here THE MAGIC.!
8- SELECT THE FILE previus saved automatically (this is saves when you do the FRP) in my case ., PC, C:, PROG FILES(X86),OCTOPLUS, OCTOPLUS LG, GO IN *DATA* FOLDER AND select the preloader.
6- DONE ! UNPLUG THE WIRE, and plug again and charge logo will apair again . phone is back to alive. if not try power and the 3rd bottom at the same time. TURN ON THE PHONE AND DONEE!!
7---- CH@RGE YOUR C1ENT!
ENJOY!! APRECIATE YOUR SUPPORT!!