Quote:
Originally Posted by Octopus box Post here success stories with Octoplus Huawei Tool. |
Welcome to Octoplus Huawei Software v.1.3.2
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM3 Intel(R) Active Management Technology - SOL
2: COM1 Communications Port
3: COM94 USB Serial Port
Job ID: 0000000001B977A7
2022-11-13 15:25:37
Starting Reset FRP
Selected phone model: JKM-LX1
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: DEFNW18C21004787
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: JKM-LX1
System: JKM-LX1 9.1.0.309(C185E2R1P1)
Android Version: 9
Base Version: JKM-LGRP2-OVS 9.1.0.309
Custom Version: JKM-LX1-CUST 9.1.0.2(C185)
Preload Version: JKM-LX1-PRELOAD 9.1.0.1(C185R1)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: JKM-LX1
System: JKM-LX1 9.1.0.309(C185E2R1P1)
MEID: 00000000000000
IMEI A: 86696304
IMEI B: 86696304
S/N: DEFNW18C21004787
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by 1.3.2 Software version.