huawei aqm-lx1 huawei id remove issue [Solved] Welcome to Octoplus Huawei Software v.1.3.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
Job ID: 0000000001B69076
2022-11-20 11:54:34
Starting Reset Huawei ID
Selected phone model: AQM-AL00
Selected method: Reset Huawei Id (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN810_V3...
Initializing remote service connection...
Writing XLOADER partition...
Reset Huawei ID failed.
Performed by 1.3.3 Software version. |