Welcome to Octoplus Huawei Software v.1.3.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
Job ID: 0000000001BFAFBF
2022-12-02 11:25:12
Starting ON/OFF Factory Mode
Selected phone model: MAR-LX1A
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Checking firmware package type
Searching device in Upgrade mode...
Detected DBAdapter Reserved Interface port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Initializing remote service connection...
Downloading patch files from the server...
Writing SHA256RSA partition...
Error: Failed write SHA256RSA partition
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.
ON/OFF Factory Mode failed.
Performed by 1.3.3 Software version.
Job ID: 0000000001BB0732
2022-12-02 11:33:14
Starting Direct Unlock
Selected phone model: MAR-LX1A
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: JRQ0219A31000188
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: MAR-LX1A
System: MAR-L01A 12.0.0.239(C431E3R2P2)
Android Version: 10
Base Version: MAR-LGRP2-OVS 102.0.0.239
Custom Version: MAR-L01A-CUST 102.0.0.3(C431)
Preload Version: MAR-L01A-PRELOAD 102.0.0.2(C431R2)
C_Version: C431
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: MAR-LX1A
System: MAR-L01A 12.0.0.239(C431E3R2P2)
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.3.3 Software version. |