GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

genci titi 2002 · 12-08-2022, 16:02

Work ID: 0000000001C1E40A
Platform: SAMSUNG
Selected model: SM-G928F
To put SM-G928F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface..
Found more then one box connected to COM23 COM23
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..

Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 2.2.3.0 Software version.

12-08-2022, 16:02	#7485 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,183 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,693	SM-G928F FRP lock is successfully reseted! Work ID: 0000000001C1E40A Platform: SAMSUNG Selected model: SM-G928F To put SM-G928F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. Found more then one box connected to COM23 COM23 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 2.2.3.0 Software version.