View Single Post
Old 01-06-2023, 13:01   #4 (permalink)
allumts
No Life Poster
 
allumts's Avatar
 
Join Date: Apr 2011
Age: 58
Posts: 16,408
Member: 1564612
Status: Offline
Thanks Meter: 12,343
Donate money to this user
Quote:
Originally Posted by kava View Post
I have searched online for paid service for oppo flashing to remove pin/password and i have no luck. if anyone is using a reliable online based firmware based on credits please do advice. I was doing ISP but would like do without it
Quote:
Originally Posted by serpas007 View Post
I also wanted such service for my Oppo Reno 2 CPH1907
Hello,

Very easy OPPO remove Password/Pin itc...

OPPO no need any Test Point for get in EDL Mode.

1) loock in google and see if you are lucky for find one FREE procedure only for Factory Reset/Format with Pin/psw itc...Not think you find for FRP w/o any tool later, try and search.

2) 100% working for "Factory Reset/Fotmat" + FRP with:


"[prog_firehose_ddr_fwupdate.elf]"
there's a BEST tool that do all in 1 min.

OPPO A53s

Quote:
Model : - Manual Method
Operation : Erase Userdata
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601300 [SDM460] 00005100
OPK_DATA : 19CF99D55CA3B2E11EA19E52E3541DEDF01898FD9F8C40E625 48F1C7F60ABD47
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr_fwupdate.elf]...Done
Executing Loader...OK
Initializing Storage...OK
Read : Allowed
Write : Protected
Alt. Write : Allowed
Alt. Write is allowed, using Factory Format Method...Done
Operation Finished.
Quote:
Model : - Manual Method
Operation : Factory Format
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601300 [SDM460] 00005100
OPK_DATA : 19CF99D55CA3B2E11EA19E52E3541DEDF01898FD9F8C40E625 48F1C7F60ABD47
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr_fwupdate.elf]...Done
Executing Loader...OK
Initializing Storage...OK
Read : Allowed
Write : Protected
Alt. Write : Allowed
Factory Format Userdata...Done
Operation Finished.
Br
Allumts
  Reply With Quote
 
Page generated in 0.08439 seconds with 7 queries