01-15-2023, 11:34
|
#1 (permalink)
|
No Life Poster
Join Date: Feb 2014 Location: gsm
Posts: 635
Member: 2131081
Status: Offline
Sonork: 76543322223 Thanks Meter: 92 | N975u read code failed [Answered] N975u read code failed.
any way to unlock? Quote: Welcome to Octoplus Samsung Software v.4.0.9.1 Work ID: 0000000001A031B3 Starting Read Info Selected model: SM-N970U Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB. Searching ADB devices... Press "OK" button on the device to allow USB debugging OK Reading info... Detected model: SM-N975U Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys Firmware compiled date: Thu Jul 28 11:51:45 KST 2022 PDA version: N975USQS7HVH1 CSC version: N975UOYN7HVH1 SW version: N975USQS7HVH1 Build number: 22600524 Phone SN: R38MA09LT9W Android version: 12 (SP1A.210812.016) Sales code: ATT Carrier Id: ATT Country: USA HW platform: qcom HW Chip: msmnile HW Modem: REV1.0 Security patch level: 2022-08-01 Warranty Void: 0 Codename: d2qsq SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SM8150 Read Info done Execution time 5 second(s) Performed by 4.0.9.1 Software version. Work ID: 0000000001A0B86A Starting Read Codes (Jul.2021) Selected model: SM-N970U Please, make sure Credit Server Credentials are set. Read Codes (Jul.2021) failed Execution time 5 second(s) Performed by 4.0.9.1 Software version. Loading account information.. Your balance: 100 credit(s) Work ID: 0000000001CB7F06 Starting Read Codes (Jul.2021) Selected model: SM-N970U Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB. Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation! Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue? Searching ADB devices... Press "OK" button on the device to allow USB debugging OK Reading info... Detected model: SM-N975U Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys Firmware compiled date: Thu Jul 28 11:51:45 KST 2022 PDA version: N975USQS7HVH1 CSC version: N975UOYN7HVH1 SW version: N975USQS7HVH1 Build number: 22600524 Phone SN: R38MA09LT9W Android version: 12 (SP1A.210812.016) Sales code: ATT Carrier Id: ATT Country: USA HW platform: qcom HW Chip: msmnile HW Modem: REV1.0 Security patch level: 2022-08-01 Warranty Void: 0 Codename: d2qsq SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SM8150 Rebooting device... OK Searching ADB devices... OK Rebooting device... OK Searching ADB devices... OK Connecting to server... Username: rumenshom Your balance: 100 credits Searching modem port... Please type *#0808# or ##3424# on your phone and select 'DM + MODEM + ADB'. After that press 'Ok' to continue operation... *Phone's dialog window may not appear, in that case ignore this step Searching modem port... OK Starting exploit... Rebooting device to Upload Mode... Searching upload mode interface... Not found Read Codes (Jul.2021) failed Execution time 5 minute(s) 33 second(s) Performed by 4.0.9.1 Software version. Work ID: 0000000001A03373 Starting Read Codes (Jul.2021) Selected model: SM-N970U Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB. Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation! Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue? Searching ADB devices... Press "OK" button on the device to allow USB debugging OK Reading info... Detected model: SM-N975U Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys Firmware compiled date: Thu Jul 28 11:51:45 KST 2022 PDA version: N975USQS7HVH1 CSC version: N975UOYN7HVH1 SW version: N975USQS7HVH1 Build number: 22600524 Phone SN: R38MA09LT9W Android version: 12 (SP1A.210812.016) Sales code: ATT Carrier Id: ATT Country: USA HW platform: qcom HW Chip: msmnile HW Modem: REV1.0 Security patch level: 2022-08-01 Warranty Void: 0 Codename: d2qsq SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SM8150 Rebooting device... OK Searching ADB devices... Device didn't load after 45 seconds. Trying to connect. OK Connecting to server... Username: rumenshom Your balance: 100 credits Searching modem port... OK Starting exploit... Rebooting device to Upload Mode... Searching upload mode interface... Not found Read Codes (Jul.2021) failed Execution time 4 minute(s) 20 second(s) Performed by 4.0.9.1 Software version. Work ID: 0000000001A0BCE5 Starting Read Codes (Jul.2021) Selected model: SM-N975U Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB. Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation! Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue? Searching ADB devices... Press "OK" button on the device to allow USB debugging OK Reading info... Detected model: SM-N975U Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys Firmware compiled date: Thu Jul 28 11:51:45 KST 2022 PDA version: N975USQS7HVH1 CSC version: N975UOYN7HVH1 SW version: N975USQS7HVH1 Build number: 22600524 Phone SN: R38MA09LT9W Android version: 12 (SP1A.210812.016) Sales code: ATT Carrier Id: ATT Country: USA HW platform: qcom HW Chip: msmnile HW Modem: REV1.0 Security patch level: 2022-08-01 Warranty Void: 0 Codename: d2qsq SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SM8150 Rebooting device... OK Searching ADB devices... OK Connecting to server... Username: rumenshom Could not connect to the server! Read Codes (Jul.2021) failed Execution time 1 minute(s) 34 second(s) Performed by 4.0.9.1 Software version. Connecting to remote service failed Starting Read Codes (Jul.2021) Selected model: SM-N975U Turn on USB debugging on the phone.
Connect powered-on phone to PC using USB via ADB. Please, don't run any other third party Softwares or start any other operations which can use your CPU/RAM resources during the operation! Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not supported! Make sure device requests to enter unlock code and only then perform "Read Codes" operation! Do you want to continue? Searching ADB devices... Press "OK" button on the device to allow USB debugging OK Reading info... Detected model: SM-N975U Fingerprint: samsung/d2qsq/d2q:12/SP1A.210812.016/N975USQS7HVH1:user/release-keys Firmware compiled date: Thu Jul 28 11:51:45 KST 2022 PDA version: N975USQS7HVH1 CSC version: N975UOYN7HVH1 SW version: N975USQS7HVH1 Build number: 22600524 Phone SN: R38MA09LT9W Android version: 12 (SP1A.210812.016) Sales code: ATT Carrier Id: ATT Country: USA HW platform: qcom HW Chip: msmnile HW Modem: REV1.0 Security patch level: 2022-08-01 Warranty Void: 0 Codename: d2qsq SIM 1 status: ABSENT SIM 2 status: ABSENT Modem board: SM8150 Rebooting device... OK Searching ADB devices... OK Connecting to server... Username: Your balance: 100 credits Searching modem port... OK Starting exploit... Rebooting device to Upload Mode... Searching upload mode interface... Not found Read Codes (Jul.2021) failed Execution time 4 minute(s) 45 second(s) Performed by 4.0.9.1 Software version. | |
| |