Welcome to Octoplus Huawei Software v.1.3.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB
Job ID: 0000000001A04FCC
2023-01-15 21:26:11
Starting Reset Huawei ID
Selected phone model: PPA-L02
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: HDYBB22930201252
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: MGA-LX9
System: MGA-L29 12.0.0.200(C185E8R1P2)
Android Version: 10
Base Version: MGA-LGRP2-OVS 102.0.0.200
Custom Version: MGA-L29-CUST 102.0.0.8(C185)
Preload Version: MGA-L29-PRELOAD 102.0.0.2(C185R1)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: MGA-LX9
System: MGA-L29 12.0.0.200(C185E8R1P2)
IMEI A: 86xxxxxxxxxxxxxx
IMEI B: 86xxxxxxxxxxxxxx
S/N: HDYBB22930xxxxxxx
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by 1.3.3 Software version. |