Hello, need help with isp ufs connection , sm-g991B connection like photos.erro log attached (bga254 socket tested with some ufs in socket reads well, and tested isp on g975f also reads ok). RST pin connected to VCCQ on , the only mds I've done to the socket was bypass R4 and R4 . resistors are all 47ohm (tryed with 22 ohm, same result)
Looking for EasyJTAG box...
EasyJTAG API ver. 3403
EasyJTAG Box Serial = 8AB721F96FE227FD
Card Serial = AA04DC7D
EasyJTAG Box Firmware = 2,5301
Changelog:
05-05-2021 (ver 1.6.6.0)
Add: New keys for Oppo unpack
Fix: Bugs that have been found through your crash report
05.05.2021 (ver 2.0.1.0)
Add: Vendor LG
Add: Mediatek Preloader Parser
Add: OnePlus Unpacker
Add: Xiaomi Custom EDL Authorization
Add: Xiaomi Remove Mi Account (only Qualcomm)
No updates
Operation: Connect to Z3X EasyJtagPlus
Setting Interface to EasyJtag2/UFS ISP
Setting IO Levels to Low
Setting Frequence to 66 Mhz
Socket Information :
Socket Mark: EasyJTAG UFS Socket BGA-254 by EasyJTAG 12.10.22
Socket Serial: 01236C2CE1A37786EE
Socket Type: UFS_SOCKET_BGA_254
Can't init device. Error: -57. Reason: Unknown error: -57
Operation: Connect to Z3X EasyJtagPlus
Setting Interface to EasyJtag2/UFS ISP
Setting IO Levels to Low
Setting Frequence to 66 Mhz
Socket Information :
Socket Mark: EasyJTAG UFS Socket BGA-254 by EasyJTAG 12.10.22
Socket Serial: 01236C2CE1A37786EE
Socket Type: UFS_SOCKET_BGA_254
Can't init device. Error: -57. Reason: Unknown error: -57
Operation: Connect to Z3X EasyJtagPlus
Setting Interface to EasyJtag2/UFS ISP
Setting IO Levels to Low
Setting Frequence to 66 Mhz
Socket Information :
Socket Mark: EasyJTAG UFS Socket BGA-254 by EasyJTAG 12.10.22
Socket Serial: 01236C2CE1A37786EE
Socket Type: UFS_SOCKET_BGA_254
Can't init device. Error: -56. Reason: Unknown error: -56
Operation: Connect to Z3X EasyJtagPlus
Setting Interface to EasyJtag2/UFS ISP
Setting IO Levels to Low
Setting Frequence to 66 Mhz
UFS Init Failed. Error: -113. Reason: Unknown error: -113
Operation: Connect to Z3X EasyJtagPlus
Setting Interface to EasyJtag2/UFS ISP
Setting IO Levels to Low
Setting Frequence to 66 Mhz
Socket Information :
Socket Mark: EasyJTAG UFS Socket BGA-254 by EasyJTAG 12.10.22
Socket Serial: 01236C2CE1A37786EE
Socket Type: UFS_SOCKET_BGA_254
Can't init device. Error: -57. Reason: Unknown error: -57
https://ibb.co/LRMgsmh https://ibb.co/0cv3HRF https://ibb.co/YLSxfbZ