Quote:
Originally Posted by m&s  Device : Samsung Galaxy A52 (SM-A525F) BIT6
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM33)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 58F6B27795E737658FF2894F7D445E023070C8C1333136F84F 23C171EB694BB6
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Error
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.2 |
post here a photo to your phone in recovery mode
b.r.