| Wiko Sunny2 firmware read ok
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : MRA58K release-keys
Ver. Incmt : 22
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-08-05
Build Time : 22.09.2017
Product Board : v2510
Board Platform : sc8830
Product Info : v2510
Product Model : SUNNY2
Product Brand : WIKO
Product Name : V2510
Product Device : V2510
Product Manfct : WIKO
NVMng : SecurityInfo
IMEI[1] : 359592089768801
IMEI[2] : 359592089875002
IMEI[3] : 358570010103893
WIFIMAC : BC41017F0FA5
BT_MAC : 21397F0141BC
SEC : SLS:0, SKS:0, SKV:3
Platform Version: MOCORTM_W16.28.2_P1_Debug
Project Version: sc7731C_CP0_modem
BASE Version: TM_BASE_W16.28.2_P1
MMI Version: sc7731C_modem
HW Version: sc7731C_CP0_modem
CMP_Time : 09-30-2016 11:02:36
MODEM TAG : MOCORTM_W16.28.2_P1_Debug_TM_BASE_W16.28.2_P1_sc77 31C_CP0_modem_sc7731C_CP0_modem_sc7731C_modem
UserData : STATE : PLAIN [EXTFS]
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:35
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : MRA58K release-keys
Ver. Incmt : 22
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-08-05
Build Time : 22.09.2017
Product Board : v2510
Board Platform : sc8830
Product Info : v2510
Product Model : SUNNY2
Product Brand : WIKO
Product Name : V2510
Product Device : V2510
Product Manfct : WIKO
AndroidVer : 6
VlnrLevel : 0x01
SC8830__WIKO__SUNNY2__6.0__MRA58K__v2510
Read : prodnv.img
ExtSparse : Compression ratio : 9%
Read : phase.cfg
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 82%
Make : persist.img
Make : cache.img
Read : recovery.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 4%
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl.bin
Firmware size : 0x7DD78040 ( 1,97 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:10:35 |