GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

barakath · 05-02-2024, 07:27

PUT TAB IN FASTBOOT MODE
SWITCH OFF TAB
CONNCET USB,AFTER SEE CHARGING LOGO
PRESS VOLUME DOWN AND POWER ON WHILE STILL USB CONNECTED.

Welcome to Octoplus FRP Tool v.2.4.3.0
Card S/N: 0103A671
Work ID: 0000000001E38884
Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: 605HW
Phone SN: 2WB6R17316001402
SW version: FDR-A05LC293B027
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 2.4.3.0 Software version.

05-02-2024, 07:27	#1 (permalink)
barakath Freak Poster Join Date: Dec 2012 Location: srilanka(pearl island) Posts: 201 Member: 1848453 Status: Offline Thanks Meter: 78	Huawei 605hw tab non listed frp unlock done PUT TAB IN FASTBOOT MODE SWITCH OFF TAB CONNCET USB,AFTER SEE CHARGING LOGO PRESS VOLUME DOWN AND POWER ON WHILE STILL USB CONNECTED. Welcome to Octoplus FRP Tool v.2.4.3.0 Card S/N: 0103A671 Work ID: 0000000001E38884 Platform: HUAWEI Selected model: _TEST-MODE Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: 605HW Phone SN: 2WB6R17316001402 SW version: FDR-A05LC293B027 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 2.4.3.0 Software version.