GSM-Forum - View Single Post

hridaya · 02-24-2006, 14:13

i have some j210 - dead phones.
they are not dead using cruiser. but phones seems new
considering they are a little a like t100 and the known problems
i have tried to repair using flash normal and repair j210 v2 from support , clear nvram but dont work

now from my past experienc RECALC DCRC does some magic on t100,z200
but on these phones gives error - be so kind and tell me is cruiser fault or the phones have some hardware faults.

Version 9.18 gamma ready!
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9002
Protocol version: 3.1
Baudrate = 115200Bd
Time spent entering bootstrap: 0s
Initializing phone hardware...
Baudrate = 115200Bd
Phone hardware initialized OK
Uploading direct access applet...
Failed!
Phone automatically detached.

Script error: No response after uploading applet. [9.18 gamma.143]

02-24-2006, 14:13	#1 (permalink)
hridaya No Life Poster Join Date: Oct 2001 Location: RO Age: 48 Posts: 686 Member: 6738 Status: Offline Sonork: 100.81405 Thanks Meter: 10	@lead j210 problems on9.18 i have some j210 - dead phones. they are not dead using cruiser. but phones seems new considering they are a little a like t100 and the known problems i have tried to repair using flash normal and repair j210 v2 from support , clear nvram but dont work now from my past experienc RECALC DCRC does some magic on t100,z200 but on these phones gives error - be so kind and tell me is cruiser fault or the phones have some hardware faults. Version 9.18 gamma ready! Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9002 Protocol version: 3.1 Baudrate = 115200Bd Time spent entering bootstrap: 0s Initializing phone hardware... Baudrate = 115200Bd Phone hardware initialized OK Uploading direct access applet... Failed! Phone automatically detached. Script error: No response after uploading applet. [9.18 gamma.143]