USE CABLE WHICH CAME WITH TELEPHONE
Download driver from here:
http://www.rexnet.it/firmware/utilit...usb_driver.zip
from cellular WITHOUT SIM, BATTERY INSERTED, USB CABLE DISCONNECTED
digit *#1546792*#
go to Internals, master key is *#2456987*#
select Test mode
select Common
select USB configuration
select Qualcomm USB
confirm and connect usb cable to telephone
install drivers when requested
open certain program...,
http://www.************.com/forum/ar...p/t-16864.html
select correct modell of cellular,
click Write IMEI
insert IMEI (without last number after / )
check at its correct and confirm
when finished disconnect cable
digit *#1546792*#
go to Internals, master key is *#2456987*#
select Test mode
select Common
select USB configuration
select Samsung USB
confirm and reboot cellular
Source:
ANVI Forum:
http://www.anvi.it/forum/index.php?showtopic=25506
For bluetooth:
First of all read from back of telephone, last part of IMEI:
(example: iif imei is 355000/00/056789/1 you need only 56789)
add 56789 with 4980736 note number what you get (example: 5037525)
swithc on telephone
*#1546792*#
Internals
*#2456987*#
Test Mode
Version Information
BD address
(Read current, if it´s wrong like 00:12:47:00:00:01)
Write BD address
Input part1: insert 4679 WHICH IS FIXED!!! hit enter.
Input part2: insert calculated number (in examble: 5037525) hit enter.
hit OK, and address is recovered.
(in example: 00:12:47:4C
D
5)
Source:
http://www.anvi.it/forum/index.php?s...luetooth&st=60