| @nbene, BB-gsm
There must be a problem with "0001,227E AMD" Flashes (Spansion is the same), BUT only in "Flash" tab of PapuaUtils...
It happened form me with an ME75 v22 and same Flash ID.
It can't read OTP IMEI there !
(the particular ME75 also had the newer - different type bootcore, and also had some problems with 'x65flasher').
The fact is that you have ESN and HASH (correct I assume...) as seen in report message.
Then go to "Codes" tab to see if they are there entered...
If not, put them yourself !
Also you will need IMEI and HWID.
If phone can open normally, then open it as regular, connect it to cable and from x65PapuaUtils press only ''Information" is 1st tab (settings). It will get IMEI and HWID for you.
If you can't open, get IMEI from back of phone and HWID form the scroll list...
Then "Calculate Skey and Bkey" ( from ''Codes" ) and you can have them at end of calculation !
Now if you boot in 'Service mode' with Bkey, then "Enter Skey in phone" (Codes) and then "Read OTP IMEI" ( in 'Various' ) you will see that it gets correctly the OTP IMEI...
There is a problem in getting OTP IMEI when booting in "Flash" tab with these type of Flashes !
(But I could have a valid Fullflash Backup from there, but not with 'x65flasher' even 1092 for that ME75 with 0001,227E falsh id.). |