GSM-Forum - View Single Post

ryanzane · 06-01-2002, 09:11

Hi forum

I'm totally novice, so please don't bite!

I'm going to try converting my 3310 v 5.03 into 3315 today and I've got few questions.

I've got a MCU pack for 3310 version 5.47 and a langguage pack A which were downloaded from Brad's site. How can I upload them to the phone using the latest KNOK (Lead's build 1 with 3310 --> 3315 support)?? What are the appropriate start addresses for each of the MCU & PPM pack?

Now please correct me if I'm wrong, because I'm going to follow the following procedures:

Using KNOK:
1. Flash MCU pack to the phone, then flash the PPM pack. What are the start addresses, start offset and count???

2. Connect MBUS cable to the phone and have it switched on then go to Phone Settings --> Quick set FAID.
3. Go to Phone Settings --> Set New IMEI
4. Go to Modify Locks ---> Reset SP Lock
5. Go to Phone Settings --> Convert 3310 into 3315
6. Reset the phone

Have I missed something here? Are the instructions misordered? Please help me out and thanks in advance for your time.

Ryan

06-01-2002, 09:11	#1 (permalink)
ryanzane Junior Member Join Date: Jun 2002 Age: 45 Posts: 14 Member: 12500 Status: Offline Thanks Meter: 0	3310 to 3315 questions Hi forum I'm totally novice, so please don't bite! I'm going to try converting my 3310 v 5.03 into 3315 today and I've got few questions. I've got a MCU pack for 3310 version 5.47 and a langguage pack A which were downloaded from Brad's site. How can I upload them to the phone using the latest KNOK (Lead's build 1 with 3310 --> 3315 support)?? What are the appropriate start addresses for each of the MCU & PPM pack? Now please correct me if I'm wrong, because I'm going to follow the following procedures: Using KNOK: 1. Flash MCU pack to the phone, then flash the PPM pack. What are the start addresses, start offset and count??? 2. Connect MBUS cable to the phone and have it switched on then go to Phone Settings --> Quick set FAID. 3. Go to Phone Settings --> Set New IMEI 4. Go to Modify Locks ---> Reset SP Lock 5. Go to Phone Settings --> Convert 3310 into 3315 6. Reset the phone Have I missed something here? Are the instructions misordered? Please help me out and thanks in advance for your time. Ryan Last edited by ryanzane; 06-01-2002 at 09:48.