GSM-Forum - View Single Post

nightxyz · 10-06-2000, 04:31

hi,

2 cables from battery is enough.
And also use 2 back cover of 5110.
solder battery contact to the first one.2 cables from + and - to the other cover (second).Disassembly a 5110 battery and take the output connector of 5110 battery.stick it to the other cover (second).
solder wires to the output connector.
Finally cut a square on the second cover to see the EEPROM.you can contact 6&7 pins directly with a screwdriver or pin of the pencil.

% 100 works and never soldering pin 6&7.

10-06-2000, 04:31	#2 (permalink)
nightxyz Freak Poster Join Date: Jun 2000 Posts: 354 Member: 1623 Status: Offline Thanks Meter: 1	hi, 2 cables from battery is enough. And also use 2 back cover of 5110. solder battery contact to the first one.2 cables from + and - to the other cover (second).Disassembly a 5110 battery and take the output connector of 5110 battery.stick it to the other cover (second). solder wires to the output connector. Finally cut a square on the second cover to see the EEPROM.you can contact 6&7 pins directly with a screwdriver or pin of the pencil. % 100 works and never soldering pin 6&7.