[kau]

i have 6600 flash with tiwster some time flash Completed,but work 3,4 hour ok after display blank keypadlight gose on .
when batt remove & on the set same problem display blank keypadlight gose on & off after some time.
when i flash the set with tiwster mcu flash ok in ppm writing Process Failed.
i try with jaf also Process Failed after try 4 ,5 time flash Completed &work fine some time.





1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,0001277E,Amd 29BDS064J
Fl1: 0x02000000-0x027FFFFF,0001277E,Amd 29BDS064J
Fl2: 0x04000000-0x047FFFFF,0001277E,Amd 29BDS064J
Fl3: 0x06000000-0x067FFFFF,0001277E,Amd 29BDS064J
Algorithm: w3_amd.fia, w3_cbusb.fia
Algorithm Ok, MSID: 84F96DA76615572C471E3B2B03
Decoded MSID: 3E4EBAF7-00584A6A-A9000000
Encoded FAID: 87AC47AA-361403A0-3C6F7F67
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:03
Area3: 0x04000000-0x046FFFFF Erased, Time: 00:53
Area4: 0x06000000-0x066FFFFF Erased, Time: 00:52
Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:01
BT MCM (21) Image Found: 0x0002DD94
BT MCM Registering Done
MCU Flashing Completed, Time: 04:33
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02000000-0x0213FFFF Erased, Time: 00:05
Write Error: hDat 14, at: 0x02010000:08
Process Failed, Repowering Mobile