| Hi,
all philips phones are clonable, so no warries about restores.
If it gave you error on writting the flash chip might be damaged or at least have some slow address lines due to damage also.
Only if the error is among the first 5% the phone should not be able to connect anymore in normal flash mode, or if you uploaded into phone a diferent type of flash file, like from a different phone. So try to conect it again in normal flash mode and check battery because is very important.
If not works, procedure is like that. Upload good working flash via Recovery Mode with testpoints. After flashing is complete, phone should also be able to power one, but because the pairing zone is unupdated should power off very quick.
After this you conect it in Test mode with Connect button and use Restore Locks to repair the pairing zone.
This is all and good luck
Regards
J.A.F. Philips |