mate- i repair about 2000 fluid damaged phones a year, and MobilerepairLog is absolutely correct.DO NOT use solvents or petrol on PCB's, as it will break the board down.Methylated spirits will do ok if you haven't got ultrasonic cleaning fluid.Isopropyl alcohol does the trick too.Ignore those who say the phone will break down in a month.Sugar based ingression rarely fails after repair, especially if remnants are cleaned efficiently the first time.My job and good company name relies on phones not failing after repair, so i make sure the job is done PROPERLY, clean pcb well, and you will have no probs.If the battery is shorted [0.0v] , hit it with a power supply, or with about 5v for a short time on the battery, then put on charge, should bring the battery back. Good Luck!-any probs, email me and I will help you
