[ren77]

I got this errors when trying to unlock this models. I used a good 1000mA power supply. Phone was succesfully unlocked. I just want to know what that error is. And is this fixed on the new version?

Heres the log of two models.



SmartMoto 2.12
S-Card: xxxxx Smart-Clip dongle, v 1.09, assigned Smart-Clip: xxxxx Europe, initializing... OK
Clip serial: xxxxxxxxx, version: 3.09, initializing... OK
Searching for phone... found Motorola Phone (L7), getting test interface... OK
Model L7
Firmware R4513_G_08.B7.DAR_RB
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... 8.D0
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F909C94880BA7F9E.bk_
Backup OK
Erasing flash memory error 80
Searching for phone... no phone found
Searching for phone... found Motorola Phone (L7), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... 8.D0
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... Intel - 28F256L18B
Reading flash id/2... none, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v,K1
Hardware IMEI: 35801100xxxxx
Security area saved to "PDS for S Blank Neptune LTE2 358011xxxxx.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F909C94880BA7F9E.bk_
Restore OK
Unlocking phone... OK
Turning phone off... OK


Also this:

SmartMoto 2.12
Searching for phone... found Motorola Phone (V235), getting test interface... OK
Model V235
Firmware R3512_G_0A.30.6CR_B
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... 8.E0
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F9199C6158051B18.bk_
Backup OK
Erasing flash memory error 80
Searching for phone... found Motorola Phone (V235), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... 8.E0
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... Intel - 28F256L18B
Reading flash id/2... none, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v,K1
Hardware IMEI: 35940800xxxxxx
Security area saved to "PDS for S Blank Neptune LTE2 35940800xxxxxx.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F9199C6158051B18.bk_
Restore OK
Unlocking phone... OK
Turning phone off... OK



br, ren