[Kashif Khan]

I am proud to be announce on behalf of setool's team that now we can unlock any DB2020 with setool in 37US$ and 12 credits.


How to unlock DB2020 phones with server. (pls note price for DB2020 unlock 12 credits!)
Step 1:
select USB as interface. that is REQUIRED.
Step 2:
select K610 as phone model (or any other DB2020 model, they are same)
Step 3:
|settings - check "use server for csca unlock/flash", "do full unlock instead of user code reset for DB2020", fill your login details.
Step 4:
back to semc tab, press unlock, attach phone with pressed "C" (or 2+5) buttons.
Step 5:
wait for signature calculation, it can took about 2 minute. If calculation will fail, your credits will NOT be deducted.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.
Step 6:
next, you will be prompted to detach phone and turn it on. do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
Step 7:
connect phone to USB.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all drivers (links below)
be SURE that you install all drivers correctly.
Step 8:
press "test point OK"
procedure will continue,phone will be switched off and unlocked.

!note.
DB2020 unlock supported on both servers .196 and .198
remember, if something will go wrong - you have a backup of security units
for now price for DB2020 unlock 12 credits (36 usd)
BR
Kashif Khan