| @ Mr. Tinkertrain
Phone was powered on when connected. Look here:
SmartMoto 2.17
S-Card: xxxxxxx Smart-Clip dongle, v 1.13, assigned Smart-Clip: xxxxxx Europe, initializing... OK
-----this part phone is powered on to be able to connect----
Searching for phone... found Motorola Phone (L2), getting test interface... OK
Model L2
Firmware R3517_G_0A.63.12R [COLOR="Red"]
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 8.D0
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F72409080CC09EA1.bk_
Backup OK <----- performing back up
Erasing flash memory error 80 <----- error here and phone lcd displays crititical error and smartmoto pops up window to remove/insert battery and press power on phone.
Searching for phone... found Motorola Phone (L2), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 8.D0
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... Intel - 28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 3532xxxxxx
Security area saved to "PDS for S Blank Neptune LTE 3532xxxxx.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F72409080CC09EA1.bk_
Restore OK
Unlocking phone... OK
Turning phone off... OK
Note that from the first part that the phone is powered on and connected to clip up to that error, no human interference is done. That means i did not disconnect nor power on the phone. I followed the procedure thoroughly.
br,
ren |