Quote:
Originally Posted by aussi-gsm  dejan
can u put this in english
******* POVEZIVANJE ******
Za koriscenje ovog programa potreban je FBUS interfejs povezan na neki
od COM1: do COM9: portova.
Ako se koristi DKU-5 interfejs, potrebno je da on bude instaliran na neki od COM1:
do COM9:
Podesavanje odgovarajuceg COM porta se vrsi u:
"c:\bb5_unlocker\logs\bb5_unlocker.cfg" fajlu, koriscenjem obicnog text editora!
******* UPOTREBA ********
Program se startuje uspesno samo ako je prethodno setovan odgovarajuci COM port.
READ PHONE:
***********
Iscitavaju ce osnovni podaci iz BB5 telefona i pravi se BACKUP za isti (polje 308,1).
WR BACKUP:
***********
Ovom funkcijom se vraca u BB5 telefon prethodno bekapovano polje 308,1.
MAKE LOG:
***********
Sluzi za pravljenje loga radi izracunavanja "SP unlock" koda!
Radi na BB5 telefonima sa rap3g v2.1 i v2.2 (6630,6680,6681,n70,n90)
OBRATITE PAZNJU NA TO DA SE SIM KARTICA NE NALAZI U TELEFONU!
SP UNLOCK:
***********
Unlock kodove iskopirajte u dir. "c:\bb5_unlocker\psw" i program ce automatski naci
odgovarajuci kod!
Ukoliko ste dobili od Vaseg provajdera unlock kod a istrosili ste sva tri pokusaja
unosa koda preko tastature, uradite sledece:
U direktorijumu "c:\bb5_unlocker\psw" kreirajte fajl "aaaaaaaaaaaaaaa_BB5.psw"
gde je "aaaaaaaaaaaaaaa" IMEI telefona.
U tako kreiranom fajlu, upisite na samom pocetku fajla "#pw+bbbbbbbbbbbbbbb+c#"
gde je "bbbbbbbbbbbbbbb" SP unlock kod a "c" redni broj koda (1-7)
Snimite fajl, i upotrebite "SP UNLOCK" funkciju.
Dejan Kaljevic |
1. Connect DKU-5 or normal COM cable to computer
2. Set proper COM cable (must be, between 1 and 9)
3. Download unlocker, run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created
8. Enter codes to phone (in /psw/ dir), or
9. Click SP UNLOCK to enter codes via FBUS
******* CONECTION ******
For this program you need Fbus cable like DK5, CA43 or similar conected to ports from COM1 to COM9.
First unpack zip fiole and strat install.bat
In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM port setings!
******* USING ********
Program can be started successfully only if is COM port in file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.
READ PHONE:
***********
Reading info data from phone and making BACKUP file for that phone( Field 308,1).
IMPORTANT DO NOT delete or modify that file because can save your *** if something goes wrong.
WR BACKUP:
***********
With that function can write backup file with Field 308,1 if exist in BACKUP folder.
MAKE LOG:
***********
Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.
SP UNLOCK:
***********
Making unlock with codes calculated by BB5_calc.exe.
SP UNLOCK PROCEDURE
Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on screen.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone.
That is all.
If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function